Delonghi KBJ3001.W De'Longhi Brillante KBJ3001W Kettle - White

User Manual - Page 4

For KBJ3001.W.

PDF File Manual, 8 pages, Download pdf file

Loading ...
Loading ...
Loading ...
malfunctions, or has been damaged in any manner. It must be returned to an
authorised service agent for repair or replacement in order to avoid hazard.
The power cable must not be replaced by the user as this requires the use
of special tools. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to
avoid a hazard.
If the kettle is overfilled, boiling water may overflow.
This appliance conforms to the Directive 2004/108/EC relative to
electromagnetic compatibility.
Materials and accessories coming into contact with food conform to EC
regulation 1935/2004.
Service and Customer Experience
If the cord is damaged it must, for safety reasons, be repaired by
De’Longhi or an authorised De’Longhi service agent.
Please refer to the enclosed guarantee leaflet for service and assistance
details.
Electrical Requirements
The flexible mains lead is supplied connected to a B.S. 1363 fused plug having a fuse
of 13 amp capacity.Should this plug not fit the socket outlets in your home, it
should be cut off and replaced with a suitable plug, following the procedure outlined
below.
Note: Such a plug cannot be used for any other appliance and should therefore be
properly disposed of, (having removed the fuse) and not left where children might
find it and plug it into a supply socket - with the obvious consequent danger.
If the plug is a moulded-on type the fuse cover must be refitted. If the fuse cover is
lost, the plug must not be used until a replacement cover is obtained. The colour of
the correct replacement fuse cover is that of the coloured insert in the base of the
fuse recess or elsewhere on the plug. Always state this colour when ordering a
replacement fuse cover.
N.B. We recommend the use of good quality plugs and wall sockets that can be
switched off when the machine is not in use.
important: the wires in the mains lead fitted to this appliance are coloured in
accordance with the following code:
As the colours of the wires in the mains lead of this appliance may not correspond
with the coloured markings identifying the terminals in your plug, proceed as
follows:
The wire which is coloured green and yellow must be connected to the terminal in
the plug which is marked with the letter E or by the earth symbol or coloured
green or green and yellow.
The wire which is coloured blue must be connected to the terminal which is
marked with the letter N or coloured black.
The wire which is coloured brown must be connected to the terminal which is
marked with the letter L or coloured red.
When wiring the plug, ensure that all strands of wire are securely retained in each
terminal. Do not forget to tighten the mains lead clamp on the plug. If your
electricity supply point has only two pin socket outlets, or if you are in doubt, consult
a qualified electrician.
Should the mains lead ever require replacement, it is essential that this operation be
carried out by a qualified electrician and should only be replaced with a flexible
cord of the same size.
Only 13amp replacement fuses which are asta approved to B.S. 1362 should be
fitted. This appliance conforms to the Norms EN 55014 regarding the suppression of
radio interference.
4
Green and Yellow to
Earth
Blue to
Neutral
13 amp
Fuse
Brown to
Live
Cord Clamp
Warning
this appliance must be earthed
GREEN AND YELLOW
BLUE
BROWN
EARTH
NEUTRAL
LIVE
Kettle KBJ 3001
Loading ...
Loading ...
Loading ...