Loading ...
Loading ...
Loading ...
INSTALLATION MANUAL
INSTALLATION
10
5 ] Remove 2 screws from top of hood (see illustration below). Keep the screws for further use.
RECIRCULATION
COVER PLATE
SCREWS
6 ] Remove Electrical Power Cable Knockout from top (vertical wiring) or back (horizontal wiring)
of hood. Install an appropriate strain relief, 1/2” diameter (not included).
NON-DUCTED INSTALLATION ONLY
7 ] Remove 3 screws retaining the recirculation cover plate (shaded part in illustration below)
to the hood. Discard this plate with its screws.
ELECTRICAL
POWER CABLE
KNOCKOUT
SCREWS
Loading ...
Loading ...
Loading ...