Loading ...
Loading ...
Loading ...
4×12.5W
2. Charge your 12 Volt battery
The solar panel kit is designed to charge a large range of batteries including Sealed, Flooded, GEL,
AGM, Lithium, lead-acid battery and other deep cycle battery. The batteries are used as car battery,
RV battery, boat battery and emergency back-up battery.
Step 1: understand your battery: battery type, capacity and voltage
Step 2: check the charge controller’s set up. We have defaulted the setting of the charge
controller is for SEALED. (AGM is also included in SEALED type.) If your battery’s type is different,
please set your battery type with the charge controller following the instructions below.
The battery type setting method (on charge controller)
Press and hold the program button for more than 5 seconds, the battery indicator LED1, LED2,
LED3 will flash accordingly. Press the button again to set up the exact battery type, after the
selection, wait 5 seconds, no flashing lights means battery setting is completed, the specific
content of the following table indicates
Loading ...
Loading ...
Loading ...