Loading ...
Loading ...
Loading ...
Washing Procedures
continued)
Safety
Door Lock
6. Setcycleselectorknobandwashercontrolsaccordingtotype, size, and
soil level of each load.
(SeeOperating Instructions card for your specific model controls.)
7. Start the washer.
Close the washer door and pull out the cycleselector knob. Foryour safety, the
door will automatically lock during the entire wash cycle. The Door Lock
indicator light will remain lit until the cycle ends.
• Washer will fill and tumble.
To stop the washer, push in the cycle selector knob.
Toopen the door during tumbling, push in the cycle selector knob. Wait for
the water to run off of the door.
To change a cycle, push in the cycle selector knob and turn it clockwise
to the desired setting. Pull out the knob to restart the washer.
To open the door during a spin cycle, push in the cycleselector knob. The
Door Lock indicator light will turn off. Wait 1-2 minutes for the lock to
release. Thedoor canthen be opened. Do not force open the locked door.
Do not store or place laundry products
on top of laundry center at any time.
They can damage the finish or
controls.
8.
Remove items when the cycle is completed.
Placewashed items in automatic dryer, line dry, or dry flat asdirected byfabric
care label. Excesswrinkling, color transfer or odors may develop in items left
in the washer after the cycle has ended.
9. General Precautions
Do not open the dispenser drawer when the washer is running.
Do not slam the washer door closed or try to force the door open
when locked (Door Lock light ON). This could result in damage to the
washer.
DONOTleave the washer door open. An open door could entice children
to hang on the door or crawl inside the washer.
Toavoid damaging the washer and personal injury, DONOT hang on or lean
against the washer door.
Do not place detergent, bleach or fabric softener containers on top of the
washer. They can damage the finish or controls.
Stain Removal
Do not use or mix
fiquid chlorine bleach with other
household chemicals such as toilet
cleaners, rust removers, acid or
products containing ammonia. These
mixtures can produce dangerous
fumes which can cause serious injury
or death.
Safe Stain Removal Procedures
To reduce the risk of fire or serious injury to persons or
property, comply with the basic warnings listed below:
Read and comply with all instructions on stain removal products.
Keep stain removal products in their original labeled containers and out of
children's reach.
Thoroughly wash any utensil used.
Do not combine stain removal products, especially ammonia and chlorine
bleach. Dangerous fumes may result.
Never wash items which have been previously cleaned in, washed in,
soaked in or spotted with gasoline, dry cleaning solvents or other
flammable or explosive substances because they give off vapors that could
ignite or explode.
Never use highly flammable solvents, such as gasoline, inside the home.
Vapors can explode on contact with flames or sparks.
6
Loading ...
Loading ...
Loading ...