Loading ...
Loading ...
Loading ...
5.1 Daily Alarm Mode - Setting the Alarm
6.0 Chronograph Mode - Start/Stop the Chronograph
6.1 Chronograph Mode - Recording and Recalling Lap Time
7.0 Timer Mode - Countdown Timer and the Quick-Set-Values
How to Set the Alarm 1 and Alarm 2
! To select the setting display, hold down the
[M] button for about 2 seconds in Alarm 1 (2)
Display, then the flashing "SET" icon will
appear.
! In setting display, press the [M] button to
change the selection between minute and
hour.
! When the digits are flashing (selected), press
the [S/S] o r [ L/R] but ton to inc re ase /
decrease the number. (Hold down the button
to change the number at a higher speed).
! When the settings are completed, hold down
the [M] button to exit the setting display. The
Watch will also exit the setting display if NO
button is pressed for 1 minute.
Chronograph Mode
! The Watch includes a function, Chronograph
Mode, to measure elapsed, accumulative
elapsed and lap times.
! The display shows 'All Zero' display when t h e
chronograph is selected at the first time or
the chronograph is reset.
How to Start/Stop the Chronograph
! W hen the chr ono gra ph i s sto ppe d (no t
counting), press the [S/S] button once to start
the chronograph (counting); press the [S/S]
button once again to stop the chronograph
(not counting). Repeating these steps will get
an accumulative elapsed time.
How to Reset the Chronograph
! To record a new set of elapsed time, hold
down the [L/R] button for 2 seconds to reset
the chronograph to 'All Zero' display when the
chronograph is stopped.
NOTE: When the chronograph is reset, the
recorded lap time will be also deleted.
Lap Time
! The chronograph can measure elapsed time
without stopping the counting - lap time.
! The Chronograph allows recording the lap
time up to 10 laps.
How to Record Lap Time
! When the chronograph is counting, press the
[L/R] button once to record a lap time (this
key operation will not affect the counting).
! The lap number and lap time will appear on
the display for 10 seconds, and it returns to
the counting display automatically.
! Repeat the steps mentioned above to get
another lap time.
How to Recall Lap Times
! To recall lap times, hold down the [M] button
in the Chronograph Display.
! When the Total Time Display appears, press
the [S/S] or [L/R] button to check the next /
previous lap time.
! Hold down the [M] button to go back to the
Chronograph Display.
How to Reset Lap Time
! To record a new set of lap time, hold down
the [L/R] button for 2 seconds to reset the
chronograph to 'All Zeros' display when the
chronograph is stopped.
Countdown Timer
! T he Wa tch inclu des a cou ntdow n t ime r
feature: the Timer Mode.
! The Timer starts counting-down from the
target time (hour, minute and second) to zero
and stops at zero.
! The target time can be set by the Quick-Set
Value and User-Preset Value.
The Quick-Set Values
! The Quick-Set-Values are a set of values
which CANNOT be changed by the user.
! Five Quick-Set Values (3,5,10,15 and 45
minutes) has been installed in the Watch for
setting the target time more easily.
The User-Preset Value
! The User-Preset Value is a target time value
which is set by the user.
! The setting range is up to 99 hours 59
minutes 99 seconds.
! Once a User-Preset Value has been set, such
as 30 minutes, that value will be stored into
the Watch for setting the target time.
! To set the User-Preset Value, check the
coming section "How to Set the User-Preset
Value" for more details.
Chronograph
Counting Display
Chronograph Stop Display
Chronograph
'All Zero' Display
hold
[L/R]
the digits
stop counting
Digits
running
1/100 sec
Total
Time
hours
minutes
seconds
[S/S]
Elapsed
time
[S/S]
[S/S]
1/10s
indicator
the next lap
memory
the 1st
lap memory
the last
lap memory
Lap Time Recall Seq uenc e
Chronograph
Lap Display
Chronograph
Counting Display
[L/R]
the digits
are running
10
seconds
the lap
number
Lap Time Recording
the lap time
will only freeze
for 10 seconds
[S/S]* [S/S]*
[S/S]*
[S/S]*
[S/S]*
Total Time
Display
Timer Display
3 min 5 min
45 min
10 min
15 min
Timer Setting Sequence
the indicator
flashing
the time which the
timer will countdown from
(hour, minute and second)
[L/R]
User
Preset
Value
(UPV)
Quick-Set-Value (QSVs)
[L/R]
[L/R]
[L/R][L/R]
[L/R]
Current Time
Daily Alarm 1 Display
SET
Daily Alarm Time Setting Sequence
hold
[M]
Increase/Decrease
the number at
a higher speed
Increase/Decrease
the number
Hour
Setting Display
digits have been
selected (flashing)
Minute
[S/S] / [L/R]
hold
[M]
[M]
Hold
[S/S] / [L/R]
SET
*Press [L/R] button to move the selection in the reverse direction
Loading ...
Loading ...
Loading ...