Loading ...
Loading ...
Loading ...
12
2. Remove the belt from the drive wheel (Fig. 13).
Belt
Fig. 13
3. Remove the screws, the washers from the drive wheel
(Fig. 14).
Washer
Screw
Fig. 14
4. Disassemble the right side cover by removing the four (4)
screws that hold it in place (Fig. 15).
Right side cover
Fig. 15
5. Use one hand to secure the auger; at the same time, use
the other hand to remove the auger assembly nut on the
right side. (Fig. 16).
Auger
assembly nut
Fig. 16
6. From the left side, remove the auger axle set (Fig. 17).
Auger axle set
Fig. 17
7. Remove the old auger from the housing (Fig. 18).
Auger
Fig. 18
8. Install the replacement auger by following the above steps
in reverse order. (Fig. 19).
Fig. 19
Loading ...
Loading ...
Loading ...