Brentwood MPI-61 User Manual

Loading ...

BEFORE FIRST USE:

IMPORTANT: Please check all packaging material carefully before discarding as there may

be accessory parts contained within the packaging material.

We recommend passing the iron over an ordinary cloth before using it for the first time.

USING YOUR STEAM IRON:

Attention: First use may cause a slight odor or small smoking upon heating, it is normal. This is a

result of the heating element chemical reaction. It quickly goes away.

FILLING THE RESERVOIR:

1. Set the steam control knob to “0” and the temperature control dial to “OFF”. Unplug the

iron from the wall outlet and wait for iron to cool down.

2. Pour water into the water inlet and fill to the “MAX” level of the water tank.

SELECTING THE TEMPERATURE:

NOTE: Always check garment label for ironing instructions before ironing garment. If the

instructions are missing, then use the table provided.

1. Insert the plug into the wall outlet and stand Iron upright. Turn the temperature control dial

(1) to the desired temperature.

2. The power indicator light will turn off once temperature has been reached.

Note: The light will turn on and off indicating that the selected temperature is being maintained.

SELECTING SHOT-STEAM AND STEAM WHEN IRONING VERTICALLY:

1. Press the shot-steam button (F) to generate a powerful burst of steam that can penetrate the

fabrics and smooth the most difficult and tough creases. Wait for a few seconds before

pressing again [Fig. 4].

2. By pressing the shot-steam button at intervals you can also iron vertically (curtains, hung

garments, etc.) [Fig. 6].

Warning: the shot-steam function can only be used at high temperatures. Stop the emission

when the power light comes on, and then start ironing again only after the light has gone off.

DRY IRONING

To iron without steam, follow the instructions in section “Steam Ironing”, leaving the steam

selector on position “O”.

SPRAY FUNCTION

1. Make sure that there is water in the reservoir.

2. Press the spray button slowly (for a dense spray) or quickly (for a vaporized spray) [Fig. 2].

Warning: For delicate fabrics, we recommend moistening the fabric beforehand using the spray

function or putting a damp cloth between the iron and the fabric. To avoid staining, do not use

the spray on silk or synthetic fabrics.

TIPS:

1. If the fabric is mixed, set the thermostat to the temperature of the fiber requiring the lower

temperature.

2. Use the lowest temperatures with fabrics that have unusual finishes such as sequins,

embroidery, flush, etc.

3. If you do not know the composition of the fabric, try testing on a hidden corner of the garment.

Start with a low temperature and increase it gradually until it reaches the ideal temperature.

Loading ...

Brentwood MPI-61 Non-stick Steam Iron