Loading ...
Loading ...
Loading ...
3. Press the lower part of the battery and push it in as
far as it will go into the battery compartment. The
battery will lock into position when you hear a click.
4. Make sure that the latches snap in place correctly.
To start the product
1. Press and hold the start button until the green LED
light comes on.
2. Use the power trigger to control the speed.
To stop the product
1. Release the power trigger.
2. Push and hold the power button until the green LED
light comes off.
3. Remove the battery from the product. Push the two
release buttons and pull out the battery.
To set the optimal airflow for your work
1. Press the power trigger to choose the optimal airflow
for your work.
2. Press the cruise control button to set the chosen
airflow, the LED comes on.
3. Continue to work without needing to press the power
trigger.
4. Press the cruise control button again to deactivate
the cruise control function.
To temporarily increase the airflow
1. Start the product. See
To start the product on page
16
.
2. Press and hold the boost button to get the maximum
airflow, the LED comes on.
a) 525iB Mark II has unlimited boost time.
b) 325iB has a limited boost time of 30 seconds.
Release and press the boost button again.
3. Release the boost button to use the product with
normal air flow.
16
1601 - 003 - 13.01.2023
Loading ...
Loading ...
Loading ...