Loading ...
Loading ...
Loading ...
Information
The air must not be discharged into a flue that is used for exhausting fumes from appliances
burning gas or other fuels.
OPERATION
LIGHTING
LIGHT REPLACEMENT
Switch off the extractor hood and isolate the extractor hood by pulling out the
mains plug or switching off the fuse.
Remove the grease filter.
Remove the light by levering its fitting from the hood body (this may require
pressure or force to be applied).
Disconnect the connector of the light.
Replace the light with a new one of the same type,making sure that you
connect the light with the light cable correctly.
Reconnect the power by inserting the mains plug or by switching on the fuse.
8
ON/OFF LIGHTING SWITCH: Press on this switch to turn on
the lights, and press again to turn them off.
OFF MOTOR SWITCH: Press on this switch to stop the
motor operation.
SPEED SWITCH: Press on this switch, the motor runs at
LOW speed.
SPEED SWITCH: Press on this switch, the motor runs at
MEDIUM speed.
SPEED SWITCH: Press on this switch, the motor runs at
HIGH speed.
Loading ...
Loading ...
Loading ...