Ancona AN1316 User Manual & Installation Instructions

Loading ...

— 12 —

Installation

STEP 10

Venting

• Depending on the exterior venting chosen (See Page 10), either exit the ducting through the ceiling or wall.

• Alwaysuserigidtypemetal/aluminumducttube(followingthebuildingcodesinyourarea)tomaximizeairow.

• Makesurethatthebackdraftapscanopentoallowformaximumairow.Connecttheducttubetothevent/damper

and securely seal with duct tape so that it is air tight.

STEP 11

Connect to AC

• ConnectACplugintoagroundedACoutlethaving120V,60Hz.Placetheoutletatamaximumdistanceof33-1/2in.

(851 mm) from where the cord exits on the hood.

• SEE IMPORTANT INSTRUCTIONS ON NEXT PAGE.

3-Pronged Plug

Ground Plug

3-Prong Receptacle

STEP 9

Installing the hood

• Remove the lters, LED lights and the range hood cover. (See Fig #3)

• Align range hood to the opening in the bottom of the cabinet and screw in

with screws. (See Fig #4)

Fig #4Fig #3

SAFETY WARNING:

Risk of electrical shock. This range hood must be properly grounded. Make sure this is done by a

qualied electrician in accordance with all applicable national and local electrical codes. Before

connecting wires, switch power off at service panel and lock service panel to prevent power from

being switched on accidentally.

Loading ...

Ancona AN1316 28" Built-in Ducted Range Hood Insert