Loading ...
Loading ...
Loading ...
._WARNING : Never use a battery that has been
dropped or received a sharp blow. A damaged battery
is subject to explosion. Properly dispose of a dropped
battery fmmediately. Failure to heed this warning can
result in serious personal mjury.
• Before using battery charger, read all instructions
and cautionary markings in this manual, on
battery charger, and product using battery
charger. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
• To reduce risk of injury, charge only nickel-
cadmium type rechargeable batteries. Other types
of batteries may burst causing personal injury and
damage. Following this rule will reduce the risk of
electric shock, fire, or serious personal injury,
• Do not expose charger to rain or snow. Following
this rule will reduce the risk of electric shock, fire, or
serious personal injury.
• Use of an attachment not recommended or sold
by the battew charger manufacturer may result in
a risk of fire, electric shock, or injury to persons.
Following this rule will reduce the risk of electric
shock, fire, or serious personal injury,
• To reduce risk of damage to charger body and
cord, pub by charger plug rather than cord wher_
disconnecting charger. Following this rule will
reduce the risk of electric shock, fire, or serious
persona] injury.
• Make sure cord is located so that it will not be
stepped on, tripped over, or otherwise subjected
to damage or stress. Following this rule will reduce
the risk of serious personal injury.
• An extension cord should not be used unless
absolutely necessary. Use of improper extension
cord could result in a risk of fire and electric shock. If
extension cord must be used, make sure:
• That pins on plug of extension cord are the
same number, size and shape as those of
plug on charger.
* That extension cord is properly wired and in
good electrical cendition; and
• That wire size is large enough forAC ampere
rating of charger as epecified below:
Cord Length (Feet) 25' 50' 100'
Cord Size (AWG) I 6 16 16
Note: AWG = American Wire Gage
• Do not operate charger with a damaged cord or
plug. If damaged, have replaced immediately by a
qualified serviceman. Following this rule will reduce the
risk of ele_ric shock, fire, or sedous personal injury.
• Do not operate charger if it has received e sharp
blow, been dropped, or otherwise damaged in any
way; take it to a qualified serviceman. Following
this rule will reduce the risk of electric shook, tire. or
serious personal injury.
• Do not disassemb|e charger; take it to a qual#ied
serviceman when service or repair is required.
Incorrect reassembly may result in a risk o'f
electric shock or fire. Following this rule will reduce
the risk of electric shock, fire, or serious personal
_njury.
• To reduce the risk of electric shock, unplug
charger from outlet before attempting any mainte-
nance or cleaning. Turning off controls will not
reduce this risk. Following this rule will reduce the
risk of electric shock, fire, or serious personal injury.
• Do not use charger outdoors. Following this rule will
reduce the risk of electric shock, fire, or serious
personal injury.
• Disconnect charger from power supply when not
in use. Following this rule will reduce the risk of
etectdc shock, fire, or serious personal iniury.
• RISK OF ELECTRIC SHOCK. DO NOT TOUCH
UNINSULATED PORTION OF OUTPUT CONNEC=
1"OR OR UNINSULATED BA'rI'ERY TERMINAL.
Save these instructions. Refer to them frequently
and use them to instruct others who may use this
tool, If you loan someone this tool, loan them
these instructions also. Following this rule wi!l
reduce the risk of electric shock, fire, or serious
personal injury.
,I_k_WARNING: Some dust created by power sanding,
sawing, grinding, drilling, and other construction
activities contains chemicals known to cause
cancer, birth defects or other reproductive harm.
Some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement
and other masonry products, and
• arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies, depending
on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well
ventilated area, and work with approved safety
equipment, such as those dust masks that are
specially designed to filter out microscopic particles.
5
Loading ...
Loading ...
Loading ...