Loading ...
Loading ...
Loading ...
ENGLISH | 25
Items needed:
1. PC with CFM installed
2. Mini USB cable (Not included)
3. Included NexStar+ Hand Control
4.12VDC 3A power for the mount
Figure 12.2 Updating Hand Control Firmware
Items needed:
1. PC with CFM installed
2. Mini USB cable (Not included)
3. Included NexStar+ Hand Control
* No additional power is required!
User Supplied
Mini USB Cable
NexStar+
Hand Control
User Supplied
Mini USB Cable
12VDC 3A
Power Supply
NexStar+
Hand Control
Aux Port
Appendix A:
Upgrading the Firmware in Your Mount
and Hand Control
Setup overview (Figure 12.1 and 12.2)
To check for new fi rmware updates, refer to this URL:
http://software.celestron.com/updates/CFM/CFM/
1. Plug your NexStar+ hand control into the AUX1 or
AUX2 port.
2. Plug a USB mini cable from your PC to your hand control.
3. Plug power into the CGX-L and power it on.
4. Open Celestron Firmware Manager (CFM)
5. CFM will check your hardware and scan for updates.
CFM will automatically determine which components
will require updating.
6. Proceed to click “Update” in CFM and allow updates
to complete.
Figure 12.1 Updating Mount and Hand Control Firmware
Loading ...
Loading ...
Loading ...