Loading ...
Loading ...
Loading ...
13
The machine has been
working, but the water
has been warming
Solenoid valve failure Replace the solenoid valve
When the ice is full, the
machine does not
display the ice full Icon
Ice full sensor damaged
Solar light interference
1. Replace the ice full sensor
2. Call the service hotline
The ice is not clear at all
1. Water supply pump
does not work
2. Tap water was used
1. Call the service hotline to replace
the water pump
2. Use purified water
1. If the power cord is damaged; it must be replaced by the
manufacturer, its service agent or a similarly qualified person in
order to avoid a hazard.
2. Fill with potable water only.
3. It is normal for the compressor and condenser surface to reach
temperatures between 70°C and 90°C during operation and
surrounding areas may be very hot.
4. Due to fast freezing, ice cubes may opaque. This is air trapped in
the water and will not affect quality or taste of ice.
5. This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities or
lack of experience and knowledge unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
Loading ...
Loading ...
Loading ...