Loading ...
Loading ...
Loading ...
8 /32 EN
Refrigerator / User Manual
Important instructions for safety and environment
tIf the product has a door handle, do not
pull the handle when re-locating the
product. The handle might be loose.
t#FDBSFGVMOPUUPKBNZPVSIBOEPSBOZ
other body part in the moving parts of
the refrigerator.
tDo not put your hand or any other
foreign materials into the ice machine
while it is operating.
2.3 Hydrocarbon (HC) Warning
tIf your product’s cooling system
contains R600a:
This gas is flammable. Therefore, pay
attention not to damage the cooling
system or the piping during use and
transportation. If damaged, keep the
product away from potential fire sources
that may cause it to catch fire and
ventilate the room where the product is
placed.
C
If the product is damaged and
if you see gas leak, please
keep away from the gas. It may
cause frostbite when it gets into
contact with the skin.
(including R134)
C
Ignore this warning if the cooling
system of your product contains
R134a.
C
Type of gas used in the product
is stated on the type plate which
is on the left wall inside the
refrigerator.
A
WARNING:
Never throw the product into fire
for disposal.
2.4 For Products with a Water
Dispenser/Ice Machine
tUse only drinking water. Do not fill the
XBUFSUBOLXJUIGSVJUKVJDFNJMLGJ[[Z
beverages, alcoholic beverages or any
other liquids incompatible for use in the
water fountain. This may cause risk to
your health and safety.
tDo not allow the children to play with
the water dispenser or Ice Maker to
QSFWFOUBDDJEFOUTBOEJOKVSJFT
tDo not insert your fingers or other
PCKFDUTJOTJEFUIFIPMFPGUIFXBUFS
dispenser, ice channel or inside the
container of the Ice Maker. This may
DBVTFJOKVSJFTPSNBUFSJBMEBNBHFT
tPressure for cold water inlet shall be
maximum 90 psi (620 kPa). If your
water pressure exceeds 80 psi (550
kPa), use a pressure limiting valve in
your mains system. If you do not know
how to check your water pressure, ask
for the help of a professional plumber.
tIf there is a risk of water impact in
your installation, always use a water
impact protection equipment in that
installation. Please consult professional
plumbers if you are not sure if there is
water impact in your installation.
tDo not make installation on the hot
water inlet.
tTake the necessary measures against
the freezing risk of the hoses. The
water temperature operating range
must be 0.6°C (33°F) minimum and
38°C (100°F) maximum.
Loading ...
Loading ...
Loading ...