1789 Norwood Avenue, Itasca, Illinois 60143
•
1-800-955-0959
•
www.fellowes.com
Brands
© 2018 Fellowes, Inc. | Part #410971
United States: 1-800-955-0959
Canada: 1-800-665-4339
Mexico: 001-800-514-9057
CUSTOMER SERVICE & SUPPORT
www.fellowes.com
PLEASE READ THESE INSTRUCTIONS BEFORE USE.
DO NOT DISCARD: KEEP FOR FUTURE REFERENCE.
Powershred
®
63Cb
The World’s Toughest Shredders
®
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of
defects in material and workmanship and provides service and support for 1 year from the date
of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to
be free from defects in material and workmanship for 1 year from the date of purchase by the
original consumer. If any part is found to be defective during the warranty period, your sole and
exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective
part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product
usage standards, shredder operation using an improper power supply (other than listed on the
label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any
additional costs incurred by Fellowes to provide parts or services outside of the country where the
shredder is initially sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable
for any consequential or incidental damages attributable to this product. This warranty gives you
specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide,
except where different limitations, restrictions, or conditions may be required by local law. For
more details or to obtain service under this warranty, please contact us or your dealer.
LIMITED PRODUCT WARRANTY
Factory Service
2
CAPABILITIES
ENGLISH
Model 63Cb
Will shred: Paper, plastic credit cards, staples and small paper clips
Will not shred: Adhesive labels, CD/DVDs, continuous form paper, transparencies,
newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than
noted above
Paper shred size:
Cross-Cut .......................................................................... 5/32 in. x 2 in. (4mm x 50mm)
Maximum:
Sheets per pass ........................................................................................................... 10*
Cards per pass ............................................................................................................... 1*
Paper entry width ........................................................................................9 in. (230mm)
* 8.5 in. x 11 in., 20lb., (75g) paper at 120V/60 Hz, 2.5Amps; heavier paper, humidity
or other than rated voltage may reduce capacity. Recommended daily usage rates:
200 sheets; 5 credit cards. 10 sheets per pass.
Fellowes SafeSense
®
shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
15
• Operation, maintenance, and service requirements are covered in the
instruction manual. Read the entire instruction manual before operating
shredders.
• Keep away from children and pets. Keep hands away from paper entry.
Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from
shredder openings. If object enters top opening, switch to Reverse (R) to
back out object.
• DO NOT use aerosol products, petroleum based or aerosol lubricants on
or near shredder. DO NOT USE “CANNED AIR” OR “AIR DUSTERS” ON
SHREDDER. Vapors from propellants and petroleum based lubricants may
combust causing serious injury.
• Do not use if damaged or defective. Do not disassemble shredder. Do not
place near or over heat source or water.
• This shredder has a Disconnect Power Switch (E) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or socket of
the voltage and amperage designated on the label. The grounded outlet or
socket must be installed near the equipment and easily accessible. Energy
converters, transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
15
15
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
Press Auto On ( )
to activate
Feed paper/card
straight into paper
entry and release
When finished
shredding set to
OFF ( )
PAPER/CARD
Plug in and put
disconnect power
switch in ON (I) position
Continuous operation: up to 8 minutes maximum
NOTE: Shredder runs briefly after each pass to clear
entry. Continuous operation beyond 8 minutes will
trigger 20-minute cool down period.
BASIC SHREDDING OPERATION
KEY
G. Control Switch and Indicator lights
1. Reverse
2. OFF
3. Auto On (blue)
4. SafeSense
®
indicator (yellow)
5. Overheat (red)
6. Door open/Bin full (red)
7. Remove Paper (red)
A. SafeSense
®
Technology
B. Paper entry
C. Pull-out Bin
D. Window
E. Disconnect power switch
1. OFF
2. ON
F. See safety instructions
E.
G.
A.
F.
B.
C.
D.
21 3 4
3
SET-UP AND TESTING
Set to Auto On ( )
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 3 seconds
shredder will shut off
SAFESENSE
®
TECHNOLOGY
Stops shredding immediately when hands touch the
paper opening.
WHEN IN SLEEP MODE
ENERGY SAVING SYSTEM
• Saves energy in four ways: energy-efficient electronics, jam prevention,
standby mode and sleep mode.
• Sleep Mode shuts down shredder after 2 minutes of inactivity.
Optimal energy efficiency 100% of
the time – in use and out of use.
In sleep mode
To get out of sleep mode
set to OFF ( ), then
Auto On ( )
Insert paper
or
JAM BLOCKER
TM
ADVANCED PRODUCT FEATURES
Blocks jams before they start
If Remove Paper
icon illuminates during the shredding process
(due to paper misfeed or wrinkle) follow the procedures below.
Patented SafeSense
®
Technology
Stops shredding immediately when
hands touch the paper opening
Jam Blocker
TM
Blocks jams before
they start
Reduce paper quantity
to an acceptable
amount and refeed
into paper entry
Set to Reverse ( )
and remove paper
Set to Auto On ( ) and
refeed into paper entry
15
15
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
PRODUCT MAINTENANCE
All cross-cut shredders require oil for peak performance.
If not oiled, a machine may experience diminished sheet
capacity, intrusive noise when shredding and could ultimately
stop running. To avoid these problems, we recommend you
oil your shredder each time you empty your waste bin.
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry
Set to OFF ( )
Set to Reverse
( )
for 2-3 seconds
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This
indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
Bin Open/Bin Full: The shredder will not run if the bin is open or full. When illuminated, close or empty the bin to resume shredding.
Remove Paper: When illuminated, set to reverse
( )
and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate and the shredder will stop shredding. If SafeSense
®
is active for 3 seconds, the shredder will automatically turn off and the user must set the switch to
OFF ( ), then Auto On ( )
to resume shredding.
1
2
Shredder pauses for
3 seconds
3
Energy Saving System
Optimal energy efficiency 100% of
the time – in use and out of use.
21
3
If Remove Paper icon ( )
is illuminated, there is too
much paper for the shredder
to power through
21 3
1
3
42
1 2
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
2
CAPABILITIES
ENGLISH
Model 63Cb
Will shred: Paper, plastic credit cards, staples and small paper clips
Will not shred: Adhesive labels, CD/DVDs, continuous form paper, transparencies,
newspaper, cardboard, large paper clips, laminates, file folders, X-rays or plastic other than
noted above
Paper shred size:
Cross-Cut .......................................................................... 5/32 in. x 2 in. (4mm x 50mm)
Maximum:
Sheets per pass ........................................................................................................... 10*
Cards per pass ............................................................................................................... 1*
Paper entry width ........................................................................................9 in. (230mm)
* 8.5 in. x 11 in., 20lb., (75g) paper at 120V/60 Hz, 2.5Amps; heavier paper, humidity
or other than rated voltage may reduce capacity. Recommended daily usage rates:
200 sheets; 5 credit cards. 10 sheets per pass.
Fellowes SafeSense
®
shredders are designed to be operated in home and office environments ranging
between 50 – 80 degrees Fahrenheit (10 – 26 degrees Celsius) and 40 – 80% relative humidity.
15
• Operation, maintenance, and service requirements are covered in the
instruction manual. Read the entire instruction manual before operating
shredders.
• Keep away from children and pets. Keep hands away from paper entry.
Always set to off or unplug when not in use.
• Keep foreign objects – gloves, jewelry, clothing, hair, etc. – away from
shredder openings. If object enters top opening, switch to Reverse (R) to
back out object.
• DO NOT use aerosol products, petroleum based or aerosol lubricants on
or near shredder. DO NOT USE “CANNED AIR” OR “AIR DUSTERS” ON
SHREDDER. Vapors from propellants and petroleum based lubricants may
combust causing serious injury.
• Do not use if damaged or defective. Do not disassemble shredder. Do not
place near or over heat source or water.
• This shredder has a Disconnect Power Switch (E) that must be in the ON (I)
position to operate shredder. In case of emergency, move switch to OFF (O)
position. This action will stop shredder immediately.
• Avoid touching exposed cutting blades under shredder head.
• Shredder must be plugged into a properly grounded wall outlet or socket of
the voltage and amperage designated on the label. The grounded outlet or
socket must be installed near the equipment and easily accessible. Energy
converters, transformers, or extension cords should not be used with this product.
• FIRE HAZARD – Do NOT shred greeting cards with sound chips or batteries.
• For indoor use only.
• Unplug shredder before cleaning or servicing.
15
15
IMPORTANT SAFETY INSTRUCTIONS — Read Before Using!
15
Press Auto On ( )
to activate
Feed paper/card
straight into paper
entry and release
When finished
shredding set to
OFF ( )
PAPER/CARD
Plug in and put
disconnect power
switch in ON (I) position
Continuous operation: up to 8 minutes maximum
NOTE: Shredder runs briefly after each pass to clear
entry. Continuous operation beyond 8 minutes will
trigger 20-minute cool down period.
BASIC SHREDDING OPERATION
KEY
G. Control Switch and Indicator lights
1. Reverse
2. OFF
3. Auto On (blue)
4. SafeSense
®
indicator (yellow)
5. Overheat (red)
6. Door open/Bin full (red)
7. Remove Paper (red)
A. SafeSense
®
Technology
B. Paper entry
C. Pull-out Bin
D. Window
E. Disconnect power switch
1. OFF
2. ON
F. See safety instructions
E.
G.
A.
F.
B.
C.
D.
21 3 4
3
SET-UP AND TESTING
Set to Auto On ( )
Touch test area and
look for the SafeSense
®
indicator to illuminate
SafeSense
®
is active and
working properly
If hand is held on SafeSense
®
area more than 3 seconds
shredder will shut off
SAFESENSE
®
TECHNOLOGY
Stops shredding immediately when hands touch the
paper opening.
WHEN IN SLEEP MODE
ENERGY SAVING SYSTEM
• Saves energy in four ways: energy-efficient electronics, jam prevention,
standby mode and sleep mode.
• Sleep Mode shuts down shredder after 2 minutes of inactivity.
Optimal energy efficiency 100% of
the time – in use and out of use.
In sleep mode
To get out of sleep mode
set to OFF ( ), then
Auto On ( )
Insert paper
or
JAM BLOCKER
TM
ADVANCED PRODUCT FEATURES
Blocks jams before they start
If Remove Paper
icon illuminates during the shredding process
(due to paper misfeed or wrinkle) follow the procedures below.
Patented SafeSense
®
Technology
Stops shredding immediately when
hands touch the paper opening
Jam Blocker
TM
Blocks jams before
they start
Reduce paper quantity
to an acceptable
amount and refeed
into paper entry
Set to Reverse ( )
and remove paper
Set to Auto On ( ) and
refeed into paper entry
15
15
*Only use a non-aerosol vegetable oil in long nozzle container such as Fellowes 35250
PRODUCT MAINTENANCE
All cross-cut shredders require oil for peak performance.
If not oiled, a machine may experience diminished sheet
capacity, intrusive noise when shredding and could ultimately
stop running. To avoid these problems, we recommend you
oil your shredder each time you empty your waste bin.
OILING SHREDDER
FOLLOW OILING PROCEDURE BELOW AND REPEAT TWICE
*Apply oil across entry
Set to OFF ( )
Set to Reverse
( )
for 2-3 seconds
TROUBLESHOOTING
Overheat Indicator: When the Overheat Indicator is illuminated, the shredder has exceeded its maximum operating temperature and needs to cool down. This
indicator will remain illuminated and the shredder will not operate for the duration of the recovery time. See Basic Shredding Operation for more information about
the continuous operation and recovery time for this shredder.
Bin Open/Bin Full: The shredder will not run if the bin is open or full. When illuminated, close or empty the bin to resume shredding.
Remove Paper: When illuminated, set to reverse
( )
and remove paper. Reduce paper quantity to an acceptable amount and refeed into paper entry.
SafeSense
®
Indicator: If hands are too close to the paper entry, the SafeSense
®
indicator will illuminate and the shredder will stop shredding. If SafeSense
®
is active for 3 seconds, the shredder will automatically turn off and the user must set the switch to
OFF ( ), then Auto On ( )
to resume shredding.
1
2
Shredder pauses for
3 seconds
3
Energy Saving System
Optimal energy efficiency 100% of
the time – in use and out of use.
21
3
If Remove Paper icon ( )
is illuminated, there is too
much paper for the shredder
to power through
21 3
1
3
42
1 2
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
MOBILITY
WITH CASTERS
™
1789 Norwood Avenue, Itasca, Illinois 60143
•
1-800-955-0959
•
www.fellowes.com
Brands
© 2018 Fellowes, Inc. | Part #410971
United States: 1-800-955-0959
Canada: 1-800-665-4339
Mexico: 001-800-514-9057
CUSTOMER SERVICE & SUPPORT
www.fellowes.com
PLEASE READ THESE INSTRUCTIONS BEFORE USE.
DO NOT DISCARD: KEEP FOR FUTURE REFERENCE.
Powershred
®
63Cb
The World’s Toughest Shredders
®
Limited Warranty: Fellowes, Inc. (“Fellowes”) warrants the parts of the machine to be free of
defects in material and workmanship and provides service and support for 1 year from the date
of purchase by the original consumer. Fellowes warrants the cutting blades of the machine to
be free from defects in material and workmanship for 1 year from the date of purchase by the
original consumer. If any part is found to be defective during the warranty period, your sole and
exclusive remedy will be repair or replacement, at Fellowes’ option and expense, of the defective
part. This warranty does not apply in cases of abuse, mishandling, failure to comply with product
usage standards, shredder operation using an improper power supply (other than listed on the
label), or unauthorized repair. Fellowes reserves the right to charge the consumers for any
additional costs incurred by Fellowes to provide parts or services outside of the country where the
shredder is initially sold by an authorized reseller. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED IN DURATION
TO THE APPROPRIATE WARRANTY PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable
for any consequential or incidental damages attributable to this product. This warranty gives you
specific legal rights. The duration, terms, and conditions of this warranty are valid worldwide,
except where different limitations, restrictions, or conditions may be required by local law. For
more details or to obtain service under this warranty, please contact us or your dealer.
LIMITED PRODUCT WARRANTY
Factory Service
