Loading ...
Loading ...
Loading ...
EN
4 EN
2021 05/2021
Putting into operation / USB sockets / Car sockets / Safety fuse
3. Putting into operation
Before use, make sure that your car’son-board voltage matches the product
specifications. Connect the device “A” part to your car socket. Attach the
device “B” part to alocation in your car where it will not pose danger do
driving and will not become loose and cause injury to people in case of an
impact. Two-sided adhesive tapes to fix the device are included in package.
Press the on/off button to turn on the USB sockets and car adapters at the
rear of the “B” device. The display will show the on-board system voltage
level.
After each trip, always turn the device off with the on/off button. This will
prevent the battery from being drained when the engine is turned off.
4. USB sockets
The car adapter incorporated four USB type Asockets - two of them are
located on the top and two on the side.
The “4” - 5V / 2,4A ports are suitable for charging devices with higher
power demands such as tablets, power banks and smart phones.
The “5” - 5V / 1A ports are suitable for charging basic, low-power devices
such as MP players, flashlights and watches.
5. Car sockets
With this adapter, you can add up to three sockets to your existing car
socket. Before loading all car sockets simultaneously, make sure that the
total current drawn by all appliances (including those connected in the USB
sockets) does not exceed the technical specified value.
6. Fuse
The fuse is located inside the device. If the specified value at the device
output is exceeded, the fuse will irreversibly cut off and the device will stop
working. In such case, please contact an authorised service centre.
Loading ...
Loading ...
Loading ...