Loading ...
Loading ...
Loading ...
Configuring Power Saving
Function Settings
1. Hold down (A) for about two seconds until
[HT] flashes.
2. Press (C) 14 times.
This displays [POWER SAVING].
3. Press (D) to toggle the setting between
enabled (on) and disabled (off).
[ON]: Power Saving enabled.
[OFF]: Power Saving disabled.
4. Press (A) to exit the setting screen.
Note
●
For details about Power Saving, refer
to the information below.
l
Power Saving Function
Returning the Watch to Its
Factory Default Settings
This section explains how to return the watch
settings below to their initial factory defaults.
●
Watch Settings
●
Reminders
●
Alarm
●
Stopwatch
1.
Hold down (A) for about two seconds until
[HT] flashes.
2. Press (C) twice.
This causes the seconds to flash.
Seconds
3. Hold down (B) for about seven seconds.
Hold down the button until [ALL] stops
flashing on the display.
Moving to Another Time
Zone
Use the procedure below to easily change day
and time settings of the watch to a destination
location.
● Before Boarding
1. Configure the World Time to the current
time at your destination.
Destination time
Current time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
2. Disable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
● In the aircraft, before arriving at your
destination
1. Swap the origin time zone time with the
destination time zone time.
After swappingBefore swapping
Destination time
Destination time
l
Using G-SHOCK Connected to
Configure Settings
l
Using Watch Operations to Configure
Settings
● After Arriving
1. Adjust the time setting.
l
Triggering Immediate Time Adjustment
2. Enable auto time adjustment.
l
Using the Watch in a Medical Facility or
Aircraft
Operation Guide 3459/3461
17
Loading ...
Loading ...
Loading ...