Loading ...
Loading ...
Loading ...
16
17. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the floor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 31 and 32). Note: Extra hardware
may be included.
To register your product and activate your warranty today, go to my.nordictrack.com.
16. See HOW TO CONNECT THE POWER CORD
on page 17, and plug in the power cord. Then,
see HOW TO USE THE MANUAL MODE on
page 21, and adjust the incline of the treadmill
to 10%.
Next, identify the Right Base Cover (121).
Position the large cutout (I) in the Right Base
Cover around the Right Upright (114), and slide
the Right Base Cover downward onto the Base
(118). Make sure that the Belly Pan Wire (96)
is on top of the Right Base Cover.
Then, slide the Left Base Cover (not shown)
onto the left side of the treadmill. Note: There
are no wires on the left side of the treadmill.
16
118
121
114
96
I
Loading ...
Loading ...
Loading ...