Loading ...
Loading ...
Loading ...
• 14 •
ENGLISH
3. Open the steam/hot water knob (Fig.1-7) slowly by
turning it counter-clockwise.
4. Press the brew button (Fig.1-1) and the steam button
(Fig.1-3).
5. Dispense the whole water tank content through the
steam wand.
6. To stop dispensing, press the brew button (Fig.1-1)
and the steam button (Fig.1-3) again.
7. Close the knob (Fig.1-7) by turning it clockwise.
8. Fill the water tank with fresh drinking water (Fig.2).
9. Insert the lter holder into the brew unit from the
bottom (Fig.3) and turn it from left to right until it
locks into place (Fig.4).
10. Place a suitable container under the lter holder.
11. Press the brew button (Fig.1-1) and dispense all the
water in the tank.
12. Once the water tank is empty, stop dispensing by
pressing the brew button again (Fig.1-1) and empty
out the container.
13. Remove the lter holder from the unit by turning
it from right to left and rinse it with fresh drinking
water.
14. The machine is now ready for use.
BREWING AN ESPRESSO USING GROUND
COFFEE
The lter holder supplied features the “crema perfetta”
lter to prepare one or two coees.
Warning! If the “crema perfetta” lter is used without
the frothing jet device, the machine will squirt out the
coee, which may result in burns.
Note. If you prefer to use the traditional lter (Fig.6/7),
remove both the “crema perfetta” filter (Fig.5) and the
frothing jet device (Fig.1-16).
To brew the rst coee, it is necessary to preheat the lter
holder rst (Fig.1-17):
1. Insert the lter holder (Fig.1-17) into the brew unit
(Fig.1-8) with a 45° movement to the left and turn it
to the right to lock it in place. The lter holder handle
must be perpendicular to the machine or slightly
tilted towards the right.
2. Place a large cup under the lter holder (Fig.1-17) and
press the brew button (Fig.1-1)
3. After the cup of water has been lled (about 150cc),
press the brew button again and wait a few minutes
for the machine to reach the correct temperature with
the lter holder inserted.
Note. Any residual water inside the lter holder must be
removed before lling the lter with ground coee.
Continue preparing the espresso:
4. Remove the lter holder (Fig.1-17) and ll it with
ground coee using the measuring scoop provided
with the machine (Fig.1-20).
Add one measuring scoop of coee for each cup.
Note. It is recommended to ask roasting companies for
nely ground coee suitable for use in coee machines or
to purchase it from large retailers.
5. Press the coee using the dedicated tamper (Fig.1-21).
The coee must be pressed evenly to obtain a well
levelled and at surface.
6. Remove any coee residues from the edge of the lter
holder (Fig.1-17).
7. Insert the lter holder (Fig.1-17) into the brew unit
(Fig.1-8) with a 45° movement to the left and turn it
to the right to lock it in place. The lter holder handle
must be perpendicular to the machine or slightly
tilted towards the right.
8. Wait until the indicator light turns on (Fig.1-5).
9. Press the brew button (Fig.1-1).
4219-465-10451 MANUAL GAG. Classic Evo EU Rev 00.ind 14 03/11/2022 11:51:1103/11/2022 11:51:11
Loading ...
Loading ...
Loading ...