Lexmark MC3224DWE User's Guide PDF

Loading ...

Note: These instructions apply only to printers that support analog fax. For more information, see “Supported

fax” on page 24.

1 From the home screen, touch Settings > Fax > Fax Setup > Fax Receive Settings > Admin Controls >

Answer On.

2 Select a ring pattern.

Setting the fax date and time

Note: Make sure that fax is

conﬁgured.

For more information, see the

Setting up the printer to fax section.

1 From the home screen, touch Settings > Device > Preferences > Date and Time > Conﬁgure.

2 Conﬁgure the settings.

Conﬁguring daylight saving time

Note: Make sure that fax is

conﬁgured.

For more information, see the

Setting up the printer to fax section.

1 From the home screen, touch Settings > Device > Preferences > Date and Time > Conﬁgure.

2 In the Time Zone menu, touch (UTC+user) Custom.

3 Tou ch UTC (GMT) Oset, and then conﬁgure the settings.

Conﬁguring

the fax speaker settings

Note: Make sure that fax is conﬁgured. For more information, see the

Setting up the printer to fax section.

1 From the home screen, touch Settings > Fax > Fax Setup > Speaker Settings.

2 Do the following:

• Set Speaker Mode to Always On.

• Set Speaker Volume to High.

• Enable Ringer Volume.

Conﬁguring the email SMTP settings

Conﬁgure the Simple Mail Transfer Protocol (SMTP) settings to send a scanned document through email. The

settings vary with each email service provider. For more information, see

e‑mail service providers.

Before you begin, make sure that the printer is connected to a network and that the network is connected to

the Internet.

Using the Embedded Web Server

1 Open a web browser, and then type the printer IP address in the address ﬁeld.

Notes:

• View the printer IP address on the printer home screen. The IP address appears as four sets of

numbers separated by periods, such as 123.123.123.123.

Set up, install, and conﬁgure 32

Loading ...

Lexmark MC3224DWE