Loading ...
Loading ...
3 4
'ˎøø
ˎ
Icc+cc\
a
a
4
.
u
ˎ
ˎ
4h a 2h;
1 -24 hrs
3(very loud).
0, 1, 2, 3, 4
#
On-Off
9Aan be finely
0, 1, 2, 3
600-1800 ²
individual requirements
Inspecting
the dryer
and loading laundry
a page 8.
for woollens
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ʋ
ting the programme
t the drying programme ...
Press the start button
Connecting the
mains plug
ons are sensitive,
touch is enough!
ʋ
ʋ
3
2
1
Drying / Short spin /
Refresh
Drying
Emptying condensation
Empty the container after each drying cycle, not during drying!
1. Remove the container, holding it level.
2. Pour out condensation.
3. Push the container back in until it clicks into place.
Cleaning the fluff filter
1. Open the door, remove the filter and fold open.
2. Remove the fluff (by wiping the filter with your hand).
3. Close the filter, insert it again and close the door.
4. Remove fluff from the door and the area around it.
Very dirty or blocked filters should be rinsed under warm
water, and then dried thoroughly.
When cleaning the fluff filter, make sure that no foreign material (down, filling
material) gets into the air duct opening. If necessary, clean the drum beforhand
with a vacuum cleaner. If foreign material still get into air duct a call after-sales
service. There is a risk of a fire.
Clean the filter in the water tank if it is dirty
1. Remove the condensation tank.
2. Remove the filter.
3. Clean the filter under running water.
4. Re-insert the filter and push in the condensation tank until it clicks into
place.
Switching off the dryer
Turn the programme selector to Off.
Do not leave damp laundry in the dryer.
Removing the laundry
The automatic Easy Iron function moves the drum at certain intervals. The load remains loose and soft for
an hour (or two hours if you manually select the cReduced Ironing function, depending on the model.)
(c
'cacøø
)c
a
a
a
a
a
a
a
a
a
a
a
Condensation container
Control panel
Air inlet
Fluff filter
Drum
4
Cover for
steam nozzle
Air cooler
Programme end once \ lights up in the display.
Interrupt programme removing or adding laundry.
The drying cycle can be interrupted for a brief period so that laundry may be added or removed.
The selected programme must then be continued until it is finished.
Hot steam may escape during the Steam Drying / Steam Refresh programmes.
1. Open the door. The drying cycle is paused.
2. Remove or add laundry and close the door.
3. If required, select a new programme and additional functions.
4. Press the Start/Stop button.
Water tank
filling hole
with filter
c
@c
c
ø@ è*è*è*è*è*è*è*è*
@è*è*è**è*è*
@è*è*è*è**è*è*
øc@ è*è*è*è*è*è*
@è*è*
@è*è*è*
w
a
H
a
X
Z
A
Loading ...
Loading ...
Loading ...