Loading ...
Loading ...
Loading ...
35OPERATION
ENGLISH
separate. If this happens, empty the ice bin
completely and clean it before reinstalling it.
• Depending on the water pressure or other
conditions, the icemaker may produce linked
cubes rather than individual pieces. The cubes
easily separate when added to drinks.
Freezer Icemaker (Craft Ice
TM
)
This feature is only available on some models.
a Feeler Arm
CAUTION
• Do not insert round ice into the in-door ice bin,
as it can damage the ice and water dispenser.
NOTE
• The icemaker begins producing ice
approximately 48 hours after the appliance is
initially installed. The first batches of ice may not
be round and clear.
• Following installation or water filter
replacement, the first few batches of ice may be
semicircular or contain air bubbles.
• If the water pressure is less than 20 psi (138 kPa)
or a reverse osmosis system is used, the shape
of the ice may vary.
• The ice may look cloudy depending on the water
quality in the installation location and the
operating conditions.
• Throw away any shards of ice you may find in the
ice bin, as they may stick to the ice stored in the
ice bin.
• After a short-term power outage, it will take
longer to make the first batch of ice, and the ice
may not be round. If the power will be out for a
longer period, throw away the ice stored in the
ice bin.
•The Craft Ice icemaker produces 1 batch of
round ice (3 pieces) at a time.
•In 3 ICE mode, the Craft Ice icemaker produces
1 batch of round ice (3 pieces) about every 24
hours. In 6 ICE mode, the Craft Ice icemaker
produces 2 batches of round ice (6 pieces total)
in the same period.
• For more ice, select the 6 ICE mode. For clearer
ice, select the 3 ICE mode.
• The time needed to make ice may vary according
to operating conditions.
• The ice bin stores 20 - 30 pieces of round ice.
Using the Freezer Ice Bin
This feature is only available on some models.
The ice bin stores ice from the freezer icemaker.
CAUTION
• The freezer ice bin must be placed correctly.
Failure to do so can damage the ice bin and
icemaker.
• Install the ice bin so that the label on the handle
faces front, toward the freezer door. The rear
side of the ice bin must face the inside of the
freezer.
- If you have both Craft Ice and Mini Cubed Ice,
the bin for the Craft Ice must be located on
the left and the bin for the Mini Cubed Ice on
the right.
• If you are not using the icemaker, remove the ice
bin to create more space inside the freezer.
• The pad attached to the bottom of the ice bin is
designed to reduce the sound of the ice
dropping. Do not remove the pad.
Loading ...
Loading ...
Loading ...