Loading ...
www.squatz.com
Before Use
Regularly inspect the general condition of the dumbbell
and check the points listed
• The dumbbell can only be adjusted when in the base unit.
• Female and male connectors must aligned, see Fig. F.
• Never attempt to lift the dumbbell from the base unit if not in fully selected position, see Fig. B.
• Carefully inspect male and female connections (see Fig. A) regulary.
Replace before use if damaged.
• Regularly check if the locking mechanism is working in all different weight selections, see Fig. D.
• Never use dumbbell if the handle can be turned with normal force when not in base unit.
Return dumbbell to distributor for service.
• Never attempt to use the dumbbell without having the complete set of weight plates in the base.
After Use
Step 1 - Fig. A
Place the dumbbell in the base unit.
Female and Male connectors must be aligned.
Male connector
Step 2 - Fig. B
Select weight by turning handle until desired
weight is centered in the window
OK
20
20
NO
Step 3 - Fig. C
Lift the dumbbell straight up out of the base.
Step 4 - Fig. D
Place dumbbell on flat surface. Try turning the
handle with normal force. The handle must
remain in locked position. Check that the bar
ends are within 5mm of the selected plate.
Step 5 - Fig. E
After use return dumbbell to base unit. Make
sure that the Male/Female connectors are aligned.
Fig. F
Make sure that the Male/Female connectors are
aligned. Do not use if connectors are damaged.
2
1