Loading ...
Loading ...
Loading ...
SDS1000X-E User Manual
89
WWW.SIGLENT.COM
If you have set either Data1’s or Data2’s value, and the signal has a data is the
same as that value. If you have set both Data1’s and Data2’s value, the signal
should has two consecutive data, the first data’s value is Data1, second data
value is Data2.
(
Note
: If the data’s value is 0xXX, any data value will be matched)
10 Address & Data
— the oscilloscope will be triggered when the following conditions
are satisfied.
The address’s length must be 10 bits and the address’s value is the same as set
value.
If you have set either Data1’s or Data2’s value, and the signal has a data is the
same as that value. If you have set both Data1’s and Data2’s value, the signal
should has two consecutive data, the first data’s value is Data1, second data
value is Data2.
(
Note
: If the set value is 0xXX, any data value will be matched)
Loading ...
Loading ...
Loading ...