Page 1 (cover) Page 2 (inside)
Page 3 (inside) Page 4 (back)
Black border shows
page size and should
not print
Black border shows
page size and should
not print
11.0"
8.50"
Features:
• Digital Thermostat with Ambient Temperature Setting
• 8-Hour Timer
• Four Settings: ECO, Low Heat (800W),
Medium Heat (1000W), High Heat (1500W)
• Stable Base with Safety Tip-Over Switch
• Safety Overheat Cut-off Protection
• Backlit LED Digital Display Panel
• Convenient Storage for Remote Control
• 120V A.C. 60Hz., 12.5A, 5120 BTUs
Oscillating
Ceramic
Tower Heater
with Remote Control
REMOTE CONTROL:
1. Install two “AAA” batteries into
remote control.
2. All functions performed with
remote control work identically to the
manual controls.
3. Remote control should be aimed
at the digital display to be received
by the heater.
NOTE: Batteries not included.
SAFETY FEATURES:
1. A thermal overload protector is built into prevent
overheating.
2. When an overheat temperature is reached, the
Heater/fan will automatically shut off. It will only resume
operation when the user resets the unit by unplugging the
heater for 10 minutes to allow it to cool. Plug the heater in
and resume use.
ENVIRONMENT:
Do not dispose of electrical appliances as unsorted
municipal waste, use separate collection facilities.
Contact your local government for information regarding the
collection systems available.
If electrical appliances are disposed on in landlls or dumps,
hazardous substances can leak into the groundwater and
get into the food chain, damaging your health and
well-being.
When replacing old appliances with new ones, the retailer
may be legally obligated to take back your old appliance for
disposal free of charge.
MAINTENANCE:
WARNING: ALWAYS UNPLUG THE CORD BEFORE
MOVING OR SERVING!
CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN
WATER! Clean the heater grille with the vacuum brush
attachment on your vacuum cleaner. This will remove lint and
dirt from inside the heater. DO NOT ATTEMPT TO TAKE
APART THE HEATER. DO NOT REMOVE THE HEATER
GRILLE. Clean the body of the Heater with a soft cloth.
CAUTION: Do not use gasoline, benzene, paint thinner,
harsh cleaners, etc. as they will damage the heater.
NEVER USE ALCOHOL OR SOLVENTS.
STORAGE: Store the heater with these instructions in
the original carton in a cool, dry place.
Save These Instructions
WARNING: SHOCK HAZARD
Use your heater only in dry environments. This heater is not
intended for use in a bathroom, laundry area, or similar
locations, or near sinks, washing machines, swimming pools
or other sources of water. Never locate heater where it may fall
into a bathtub or other water container. Do not use heater
outdoors. Do not use in damp environments such as ooded
basements.
WARNING: HOT SURFACES
Do not touch body of heater when in use. This heater is hot
when in use, to avoid burns, do not let bare skin touch hot
surfaces. If provided, use handles when moving this heater.
WARNING: FIRE HAZARD
Heater has hot and arcing or sparking parts inside. Do not use
near combustible materials or ammable gases or sources of
heat. DO NOT USE in areas where gasoline, paint or
ammable materials are used or stored. Keep combustible
materials such as furniture, pillows, bedding, papers, clothes
and curtains at least 3 feet (0.9 m) from the front of the heater
and keep them away from the sides and rear. To prevent a
possible re, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where
openings may become blocked. Do not insert or allow foreign
objects to enter any ventilation or exhaust opening as this may
cause an electric shock, re, or damage the heater.
WARNING:
ELECTRICAL SHOCK HAZARD
Do not use with damaged cord or plug. Use with adequate
electrical system that is up to code.
The supply cord has a polarized plug. As a safety feature this
plug will t in a polarized outlet only one way. To prevent
electric shock, match wide blade of plug to wide slot, fully
insert plug. If the plug does not t contact a qualied
electrician.
Do not operate any heater with a damaged cord or plug or
after heater malfunctions, has been dropped or damaged in
any manner. Do not operate heater with a broken heating
element or ceramic cone or any visual imperfections. For
repairs covered under warranty, see warranty statement. For
all other repairs contact Comfort Zone® Customer Service by
telephone or mail for information and assistance.
PET OWNERS NOTE:
The health of birds and some small pets are extremely
sensitive to the fumes given off during the initial use of many
appliances. Although these fumes are not harmful to humans,
it is recommended that this heater not be used around birds
and small pets during its initial use until the manufacturing
corrosion coatings burn off.
INTENDED USE:
This product is intended for indoor residential and ofce use only, not for
industrial or other commercial application. Use only with electrical wiring
that is in good working order and that meets applicable codes and
ordinances. This heater must be plugged in to a 120V AC, 15 Amp. (or
larger) circuit. Do not plug anything additional into the same circuit. If you
have any questions whether your wiring is adequate, consult a qualied
electrician. Risk of re, overheating, malfunction, property damage, injury
or even death may result if not adhered to.
Use your heater-fan only with a working smoke detector located in the
vicinity of your heater/fan.
While using your heater/fan, you should follow the IMPORTANT
INSTRUCTIONS listed below. As part of those instructions, we have
used the word “WARNING” to indicate the level of hazard: WARNING
indicates a hazard which, if not avoided, could result in injury or death.
IMPORTANT INSTRUCTIONS
When using electrical appliances, basic precautions should always be
followed to reduce the risk of re, electric shock and injury to persons,
including the following:
• Read all the instructions before using this heater/fan.
• This heater/fan is hot when in use. To avoid burns, do not let bare skin
touch hot surfaces. Use provided handle when moving this heater.
Keep combustible materials, such as furniture, pillows, bedding,
papers, clothes and curtains at least 3 feet (0.9 meters) from the front
of the heater-fan and keep them away from the sides and rear.
• Do not use heater unattended. Use of extreme caution is necessary
when any heater is used by or near children, invalids, disabled
persons or pets.
• Do not operate the heater with a damaged power cord or after the
heater malfunctions, has been dropped or damaged in any manner.
Return heater to authorized service facility for examination, electrical
or mechanical adjustment or repair.
• Do not use heater outdoors.
• Use your heater only in dry environments. This heater is not intended
for use in a bathroom, laundry area, or similar locations, or near sinks,
washing machines, swimming pools or other sources of water. Never
locate heater where it may fall into a bathtub or other water container.
Do not use in damp environments such as ooded basements.
• Do not place the heater on a small, unlevel, uneven or any surface
which might allow heater to tip or fall.
• For proper operation, heater should be placed on a smooth,
non-combustible surface. Do not place on rugs, carpet, vinyl ooring
or other plastic surfaces. Not for use outdoors or in wet areas.
• This heater is not designed as a primary heat source.
• Always plug heaters directly into a wall outlet/receptacle. Never use
with an extension cord or relocatable power tap (outlet/power strip).
Always unplug heater when not in use.
• Do not run power cord under carpeting. Do not cover cord with throw
rugs, runners or similar coverings. Arrange cord away from trafc area
where it will not be tripped over.
• To disconnect heater, turn controls off then remove plug from outlet.
• Do not insert or allow foreign objects to enter any ventilation or
exhaust opening as this may cause an electric shock or re or
damage the heater.
• To prevent a possible re, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces like a bed, where openings may
become blocked.
• A heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint or ammable liquids are used or stored.
• Use this heater only as described in this manual. Any other use not
recommended by the manufacturer may cause re, electric shock or injury
to persons or property.
SAVE THESE INSTRUCTIONS
6. Press MODE button to select LOW, MEDIUM, HIGH or
ECO heating power. LED screen will display:
• LOW: 800W
• MEDIUM: 1000W
• HIGH: 1500W
• ECO: Heater will automatically adjust the heat output
to reduce energy use and lower heating costs. If the room
temperature is well below the set temperature, the heater will
operate at HIGH output, and both the and icons will
show. As the room temperature gets closer to the set
temperature, the heater will automatically reduce the heat
output until the set temperature is reached. As this happens,
the heat icons will change to and then .
FAHRENHEIT OR CELSIUS DISPLAY:
1. To switch the display between Fahrenheit and Celsius, hold
down both the and buttons at the same time for two
seconds.
Fig. 2
Model No.
CZ523RBK
Fig. 1
Storage for
Remote Control
OPERATION:
The heater may be operated by the controls located on the
heater (see Fig. 1) or by your remote control (see Fig. 2).
1. Carefully remove the heater from the plastic bag
and the carton.
2. Place the heater on a rm level surface.
3. Plug the cord into a 120V electrical outlet. A beep
will sound and the temperature display will turn on.
The heater is ready to use.
4. Turn the heater ON by pressing the power button
on the control panel (Fig.1).
5. To turn the heater OFF, press the power button.
NOTE: When the unit is powered off on the control panel,
the fan may continue to run for a while to cool off the
ceramic elements and dispense any retained heat.
The unit will shut off automatically.
OSCILLATING FUNCTION:
The Oscillating function will work in any mode.
1. Press the button to oscillate the heater.
2. To turn the oscillation off, press the button again.
TIMER FUNCTION: The Timer function will work in any
mode. The Timer function allows you to set the length of
operation from 1 to 8 hours. Each time the timer button
is pressed the length of operation will increase 1 hour. The
duration the timer is set for will be displayed on the LED
screen in hour increments.
TO TURN THE TIMER FUNCTION OFF: Press the timer
button continuously until the LED screen displays “0 Hr”.
NOTE: The timer function is not an excuse to leave the heater
unattended.
TEMPERATURE SETTING:
1. This heater is designed to maintain a comfortable room
temperature.
2. When the heater is turned on by pressing the power
button, it will operate on HIGH setting continuously. The digit
panel will display along with the current room temperature.
3. The temperature setting can be adjusted between 41°F
(5°C) to 90°F (32°C) under any mode. To change the
temperature, press the temperature buttons or to
adjust the temperature setting UP or DOWN.
4. The temperature display will blink while it is being adjusted.
When the desired temperature is reached, it will take about
5 seconds to accept the setting. Once the display stops
ashing, the room temperature will reappears on the LED
screen to indicate the desired temperature is set.
5. While the temperature setting is in either LOW, MEDIUM, or
HIGH mode, the unit will stay in this mode, cycling on and off
to maintain the set temperature. The heater will reach the set
temperature faster in HIGH setting in comparison to LOW
setting.
6. While the temperature setting is in ECO mode, the unit will
automatically adjust its heating output between LOW,
MEDIUM, or HIGH. The unit will cycle on and off to maintain
the set temperature.
NOTE: The MODE icon will ash to indicate the heater is
still on. Do not leave the heater unattended.
MEMORY FUNCTION: Once the unit has been used, the
internal memory function will keep its previous settings as long
as the electrical cord remains in the same outlet.
LIMITED WARRANTY
This unit is guaranteed to the original retail purchaser against defects in quality or workmanship for a period
of one year from the date of original purchase. If this unit fails because of a manufacturing defect within 30
days of purchase, return the unit, with your receipt, to the retailer. After 30 days, but within the warranty
period, if the unit was purchased within the continental United States, return it, freight prepaid, to World and
Main for repair or replacement. If the unit was purchased outside the continental United States, return the
unit to the place of purchase. This warranty does not cover damage caused by misuse, abuse, overheating
or alteration. Repairs made by anyone other than World and Main are not covered in this warranty. World
and Main will not be held liable for any losses due to neglectful operation. All implied warranties, including
the warranties of merchantability and of fitness of purpose, if applicable, are hereby limited in duration to
the period of one year from the date of original retail purchase. Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you. Incidental or consequential
damages arising from a breach of either express or implied warranties are hereby disclaimed and excluded.
Some states do not allow the exclusion of limitation of incidental or consequential damages, so this
limitation or exclusion may not apply to you. Upon the expiration of this warranty all such liability will
terminate. No other warranties are expressed or implied.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to
state. No informal dispute settlement mechanisms are available. This limited warranty is given in lieu of all
other warranties.
Manufactured for:
World and Main (Cranbury), LLC
324A Half Acre Rd.
Cranbury, NJ 08512 USA
800-221-6895
www.comfortzoneproducts.com
Rev. 012017
