Loading ...
Loading ...
Loading ...
5. Health and Safety Information
• DO NOT use this heater with a programmer, timer,
separate remote-control system or any other device
that switches the heater on automatically, as it may be
covered or positioned incorrectly when activated and
pose a re risk.
• NEVER cover any part of the heater as this may cause
the heater to overheat or the covering item to ignite or
burn.
• NEVER insert foreign objects through the grilles.
• DO NOT operate the heater without both of the grilles
installed.
• WARNING! Risk of shock!
− DO NOT allow the heater to come into contact
with water or any other liquid.
− DO NOT use this heater in the vicinity of a bath,
shower, swimming pool or other body of water.
− DO NOT touch the heater with wet hands.
• WARNING! Some parts of the product become very
hot during use and may cause burns.
− DO NOT touch the metal grille on the front or rear
of the heater during or immediately after use.
− ALWAYS handle the heater by the safety tab when
adjusting the position of the heater during and
immediately after use.
− ALWAYS switch o the heater, disconnect it from
the power supply and allow it to cool for at least
20 minutes before attempting to move or
reposition it.
− Particular attention MUST be given when children
and vulnerable people are present.
5.2 Connection to the Power Supply
This appliance is supplied with an approved plug and
cable for your safety. The value of the fuse tted is
marked on the pin face of the plug. Should the fuse need
replacing, ensure the substitute is of the correct rating,
approved to BS 1363/A and ASTA or BS Kite marked.
ASTA
BSI
The fuse can be replaced by removing the cover of the
plug using a cross-headed screwdriver and removing the
broken fuse from its holder. This should only be
performed by suitably qualied personnel.
If the power supply cord is damaged, it must be replaced
by Draper Tools, an authorised service agent or similarly
qualied personnel in order to avoid a hazard.
The damaged or incomplete plug, when cut from the
cable, shall be disabled to prevent connection to a live
electrical outlet.
This product is Class I† and is designed for connection to
a power supply matching that detailed on the rating label
and compatible with the plug tted.
CAUTION! DO NOT use this product with an extension
lead or multi-socket.
†
Earthed: This product requires an earth connection to
protect against electric shock from accessible
conductive parts in the event of a failure of the basic
insulation.
– 7 –
EN
Loading ...
Loading ...
Loading ...