Loading ...
Loading ...
Loading ...
11
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the power head from the collection tank (Fig. 3). Place power
head on a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).
5. Clean or replace the lters.
6. Check the hose, attachments, and power cord to ensure that they have not been damaged.
7. Place the power head back onto the collection tank and secure latches.
IMPORTANT! Clean or change the lter regularly for best performance. ALWAYS USE THE
REUSABLE CLOTH FILTER FOR DRY VACUUMING. If the machine is used without the reusable
cloth lter, the motor will burn out and the warranty will be voided. Always keep spare lters on
hand.
NOTICE! The lters included are made of high quality materials designed to stop small dust
particles. The reusable cloth lter should be used for dry pick-up only. A dry reusable cloth lter is
necessary to pick up dust. If the reusable cloth lter is wet, it will clog quickly and be very difcult
to clean. Handle the lter carefully when removing it for cleaning and replacing it. Check the lters
for tears or small holes. A small hole can let dust pass through and out of the lter. Do not use a
lter with holes or tears; replace it immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The accessories
should be cleaned and stored so they can be readily available when needed. Store the wet/dry
vacuum indoors.
REPAIRS
Repairs for this wet/dry vacuum should be performed only by qualied service personnel using
only identical replacement parts.
MAINTENANCE
2
1
3
4
EMPTYING THE COLLECTION TANK
WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWER HEAD FROM COLLECTION TANK.
Loading ...
Loading ...
Loading ...