Loading ...
Loading ...
Loading ...
Care and Cleaning
Wire Basket
Wire basket slides out for easy access to items in back.
• Remove wire basket by lifting and pulling out.
• Replace wire basket by sliding in.
Wire /
basket _%.
Ice Bin (some models)
Ice bin sits below the ice service rack on the wire freezer
shelf.
Ice 2.
2. pliable.
WARNING
Disconnect power to refrigerator before cleaning to
avoid electrical shock which can cause severe
personal injury or death. After cleaning, restore
power.
CAUTION
Read and follow all manufacturer's cleaning
directions to avoid personal injury or property
damage,
General Cleaning
1. Wash surfaces and exterior with 4 tablespoons
baking soda dissolved in I quart warm water and a
soft, clean cloth.
2. Rinse surfaces and exterior with warm water. Dry
surfaces with a soft, clean cloth.
3. DO NOT USE the following items:
• abrasive or harsh cleaners, ammonia, chlorine
bleach, etc.
• concentrated detergents or solvents
• metal scouring pads
These items can scratch, crack, and discolor
surfaces.
4. Do not place buckets, shelves, etc., in dishwasher.
Adhesives
Remove adhesive residue from refrigerator surfaces
by rubbing toothpaste into adhesive with fingers until
adhesive loosens.
Rinse surface with warm water. Dry surface with a
soft, clean cloth.
Door Gaskets
Clean door gaskets every 3 months according to
General Cleaning instructions. Clean any spills
immediately.
Apply a light film of petroleum jelly to keep gaskets
Condenser Coils
Clean condenser coil behind toe grille every 3 months to
ensure maximum performance of refrigerator.
Accumulated dust and lint may cause the following:
reduced cooling performance
increased energy usage
premature part failure
I. Remove toe grille by holding ends and pulling away
from refrigerator.
2. Clean front surface of condenser coil with a vacuum
cleaner hose nozzle.
3. Replace toe grille by inserting clips in holes and
snapping in.
II'1
m
t3
Loading ...
Loading ...
Loading ...