Loading ...
Loading ...
Loading ...
8
OPERATING INSTRUCTIONS
Sit Griddler & Deep Pan on a clean, flat surface
indoors where you intend to cook. When you are
ready to begin cooking make sure the drip tray
and desired plate surfaces are fitted. Plug your
Griddler into an electrical outlet and press the
ON/OFF (
) button. The LCD will show the
start-up screen (as per left image below).
SELECT COOKING FUNCTION:
There are two cooking functions. GRILL and
DEEP PAN. Depending on which plates you
have inserted into the bottom of the unit, the
Griddler will automatically detect which function
to cook and indicate on the LCD screen (see
images below).
Note: The Griddler has a preset temperature of
200ºC for both GRILL and DEEP PAN Modes.
SETTING THE TEMPERATURE FOR
GRILL OR GRIDDLE / SANDWICH
PRESS / OPEN BBQ MODE
To set temperatures for Grill, Griddle, Sandwich
Press or Open BBQ mode, the unit will detect
the GRILL function automatically and be preset
to 200°C. To change the temperature, rotate the
PRESS to CONFIRM dial to the left (decrease
temperature) or the right (increase temperature).
This will allow you to scroll through temperatures
- 80°C, 120°C, 160°C, 180°C, 200°C & 230°C.
Press the PRESS to CONFIRM dial for desired
temperature - when reached the temperature
will no longer flash.
“+” Temperature Increase
“-”
“-” Temperature Decrease
The Griddler will then begin to PREHEAT. This will
appear on the LCD screen as well as the preheat
status bar which shows the heating progression.
When 5 bars are illuminated, the grill is at the
correct temperature and the unit will BEEP.
GRILL will turn from red to green on the display
and you will now have the option to set a timer
when “00:00” appears in the screen.
SETTING THE TIMER
NOTE: the timer is optional and is not
required for the cooking process to occur. If
not selected within 1 minute after preheat,
the timer will revert to --:--.
• Countdown Timer – When the 00:00 is
flashing, rotate the PRESS to
CONFIRM
dial to
the left (decrease time) or right (increase
time). The time will increase in 30 second
increments. If you wish to increase in 1 minute
increments rotate and hold the dial for more
than 3 seconds. Press the PRESS to
CONFIRM
dial to confirm time and begin countdown.
The unit will beep 3 times every 10 seconds
when the timer has finished counting down.
The timer will then start counting up to show
how much time has elapsed.
NOTE: Once the timer starts counting
upwards, it will beep every 3 seconds until
cooking is stopped. TO DISABLE THE BEEPS,
PRESS AND RELEASE THE PRESS to
CONFIRM
DIAL.
Preheating
Preheating is
almost done
The unit is
preheated Ready
to set timer
Loading ...
Loading ...
Loading ...