Loading ...
Loading ...
Loading ...
16 ENGLISH
Nylon cutting head
NOTICE: Be sure to use genuine Makita nylon
cutting head.
1
2
3
4
5
► 1. Nylon cutting head 2. Spindle 3. Hex wrench
4. Loosen 5. Tighten
1. Insert the hex wrench through the hole in the gear
case to lock the spindle. Rotate the spindle until the hex
wrench is fully inserted.
2. Place the nylon cutting head onto the spindle and
tighten it securely by hand.
3. Remove the hex wrench from the gear case.
To remove the nylon cutting head, follow the installation
procedures in reverse.
OPERATION
Attaching the shoulder harness
WARNING: Be extremely careful to maintain
control of the tool at all times. Do not allow the
tool to be deected toward you or anyone in the
work vicinity. Failure to keep control of the tool
could result in serious injury to the bystander and the
operator.
CAUTION: Always use the shoulder harness
attached to the tool. Before operation, adjust the
shoulder harness according to the user size to
prevent fatigue.
CAUTION: Be careful not to trap clothing in
the buckle.
CAUTION: Before operation, make sure that
the shoulder harness is properly attached to the
hanger on the tool.
1. Put on the shoulder harness and fasten the
buckle.
2. Clasp the hook on the shoulder harness to tool's
hanger.
2
1
► 1. Hook 2. Hanger
3. Adjust the shoulder harness to a comfortable
working position.
Loading ...
Loading ...
Loading ...