Loading ...
Loading ...
Loading ...
11
How to Wire Your Ceiling Fan (Continued)
WARNING
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors. Do not operate fan until the blades are in
place. Noise and motor damage could result.
3. Connect wires using connectors as shown in
Figure 4.
Wire Connectors
RECEIVER HARDWARE USED:
X 9
CAUTION: INCORRECT WIRE CONNECTION
COULD DAMAGE THIS RECEIVER.
WARNING
The blades must be installed first before programming
is performed.
Figure 4
BLUEWHITE
BLUE
BROWN
BROWN
BLACK
WHITE
L
N
AC
POWER
LIGHT KIT
GROUND
HANGER
BRACKET
HANGER
BALL
DC MOTOR
RECEIVER
BLACK
ANTENNA
BLACK
WHITE
BLUE
RED
GRAY
YELLOW
RED
GRAY
YELLOW
RED
L1
YELLOW /
GREEN (2)
4. After connections have been made, put the white
and green leads to one side and the black leads
towards the other side, the connection should be
turned upward and carefully push leads into the outlet
box. The wires should be spread apart with the
grounded conductor and the equipment-grounding
conductor on one side of the outlet box and the
ungrounded conductor on the other side. (Figure 5)
Listed
Outlet Box
White Wire
from Supply
Green Wire
from Supply
(Ground)
Household
Supply
Black Wire
from Supply
Black Wire
from Receiver
White Wire
from Receiver
Green Wire
from Hanger
Bracket (Ground)
Green Wire
from Hanger
Ball (Ground)
Green Wire
from Receiver (2)
(Ground)
Receiver
Red Wire
from Supply
Figure 5
Loading ...
Loading ...
Loading ...