Loading ...
Loading ...
Loading ...
16EN
2. Clean up HEPA Filters and Metal Filters
When there is hair ber winding on the metal lter, and there is obvious dust
on the surface of the HEPA lter, please clean it up in time.
If the HEPA lter is full of dust, the dust will enter the motor,
and the motor will be blocked, heated, losing the suction
power.
Push the dust cup release button to remove the dust cup.
Take off the HEPA filter first, then remove the metal filter in a clockwise
direction.
Clean the HEPA lter, gently tap or brush off the dust with the small cleaning
brush.
Wash the HEPA lter and the metal lter with warm water.
Dry the lters in a ventilated area for 24 hours.
• Check the lter frequently
• Disassembly of dust cup
• After cleaning up, close the dust cup lid. A click will be heard when it is
completely closed.
Tips:
Please clean the lter in time, the use of a clean lter can make the
vacuum cleaner maintain the best suction effect. Or contact the after-sales
service by e-mail to purchase a new lter.
Tips:
Do not wash with dirty water.
Do not leave the metal lter and HEPA lter in a damp place.
Do not speed up the drying of the lter by exposing it to the sun or using a
hairdryer, as this may damage the lter and shorten its service life.
①②③
Loading ...
Loading ...
Loading ...