Summit FFBF284SSIMLHD

User Manual - Page 8

For FFBF284SSIMLHD.

PDF File Manual, 45 pages, Read Online | Download pdf file

FFBF284SSIMLHD photo
Loading ...
Loading ...
Loading ...
8
Using Your Refrigerator
Indicator
panel
(Internal
Display) *
Indicator panels may vary according to the product
model. Audiovisual functions on the indicator panel help
you when using your product.
8
1
2 3
Your cooler/freezer should be installed at least 30 cm away
from heat sources such as hobs, ovens, central heater, and
stoves and at least 5 cm away from electrical ovens and
should not be located under direct sunlight.
• Please make sure that the interior of your cooler/freezer is
cleaned thoroughly.
If two units are to be installed side by side, there should be
at least a 2 cm distance between them.
When you operate your cooler/freezer for the first time,
please observe the following instructions during the initial six
hours:
The door should not be opened frequently.
• It must be operated empty without placing any food in it.
Do not unplug your unit. If a power failure occurs out of
your control, please see the warnings in the
TROUBLESHOOTING section.
The baskets/drawers that are provided with the chill
compartment must always be in use for low energy
consumption and for better storage conditions.
Food contact with the temperature sensor in the freezer
compartment may increase the energy consumption of the
unit. any contact with the sensor(s) must be avoided.
This product has been designed to function at ambient
temperatures up to 43°C (90°F). Even if the ambient
temperature falls to -15 °C (5°F), frozen food in the freezer
will not thaw thanks to its Advanced Electronic Temperature
Control System, the product should NOT be exposed to low
ambient temperatures. This is because the freezer cannot
go down to standard operating temperature. When reaching
continuous operation, the product can be moved to another
place. Thus, later you can place your product in the garage
or an unheated room without the concern of causing frozen
food to get rotten. However, it is likely that above mentioned
low temperatures may cause the freezing of the food in the
fridge compartment; thus, please consume the food items in
the fridge in a controlled way as needed. When the ambient
temperature goes back to normal, you may change the
button setting according to your need.
• If the ambient temperature is below 0°C (32°F), the food in
the refrigerator compartment will freeze. Therefore, we
recommend not using the fridge compartment in such low
ambient temperatures. You may continue to use the freezer
compartment as usual.
• In some models, the instrument panel automatically turns
off 5 minutes after the door has closed. It will be reactivated
when the door is opened, or any key is pressed.
Due to temperature changes as a result of opening/closing
the product door during operation, condensation on the
door/body shelves and the glass containers is normal.
*
optional
7
6
10*
5
4
1.
Freezer
compartment
indicator
The refrigerator compartment light is illuminated while the
freezer
compartment temperature is set.
2.
Error
status
indicator
If your unit is not cool enough or there is a fault in the
sensor, this indicator is activated. When this
indicator is
activated, “E” is displayed on the freezer
compartment
temperature indicator, and numbers such
as “1,2,3.
are
displayed on the refrigerator compartment
temperature indicator. These numbers on the indicator
inform
service personnel about the error.
3.
Temperature indicator
Indicates
freezer
and
refrigerator
compartment
temperature.
4.
Vacation
function
button
Press the
Vacation Button for
3 seconds to activate this
function. When the vacation function is
activated, - - is
displayed on the refrigerator compartment temperature
indicator,
and no active cooling is performed in the
refrigerator
compartment. It is not suitable to keep the food in
the refrigerator
compartment when this function is
activated.
Other compartments shall be continued to be cooled as
per their set temperature. To cancel this function, press
the
Vacation button again.
5.
Temperature
setting
button
Changes the temperature of the relevant compartment
between -0.4°F-(-11°F) and 34°F-46°F.
6.
Compartment
selection
button
Selection button: Press the compartment selection button to
switch between the refrigerator and freezer compartments.
7.
Refrigerator
compartment indicator
The refrigerator compartment light is illuminated while the
refrigerator
compartment temperature is set.
8.
Economy mode indicator
Indicates that the refrigerator operates in an energy saving
model. This display shall be activated if the freezer
compartment temperature is set to -18°C (0.4
°F)
.
9.
Vacation function indicator
Indicates that vacation is activated.
10.
Icemaker function (optional)
Indicates whether the icemaker is on or off.( ) If
off,
then the icemaker is not operating. To operate the
icemaker
again, press and hold the On-Off button for 3
seconds.
5
Hot Surface Warning!
The Side wall of your product is
equipped with refrigerant pipes to
improve the
cooling
system.
Refrigerant
with
high temperature
may flow through these
areas, resulting
in hot surfaces on the
side wall this is
normal and does not
need
any
servicing. Please,
pay
attention
while
touching these areas.
4
Preparation
Loading ...
Loading ...
Loading ...