Loading ...
PRODUCT STRUCTURE
PREPARING THE HEATER
WARNING: Risk of Circuit overload!
High wattage 1500W, Rated current: 12.5A. Do not operate
another high wattage product on the same circuit. Receptacle
requirements: NEMA #5-20R, 125-volt grounding receptacle,
20 ampere.
Control panel
Font cover
Back cover
Air outlet
Air inlet
Base
Power cord
1. Set the heater on a flat, even and steady surface.
2. Plug into AC 120V 60Hz power supply.
NOTE: To prevent personal injury, always use a licensed electrician to install new outlets or circuits.
No adapter should be used with this product.
CONTROL PANEL & REMOTE
Back side of
Remote
Button battery
CR2025 3V
Positive pole
PUSH
1. REMOVE the insulating sheet for first use. There are 5 buttons on the
remote, which are equivalent to the functions of the control panel.
2. Point the remote to control panel, and maximum signal range is 16
feet.
Tip-over switch at the
bottom of the base
Handle
MODE
TEMP
TIMER
OSC.
POWER
9 5℉
8 6℉
7 7℉
5 9℉
8 h
4 h
2 h
1 h
Tip-over switch
Loading ...
Loading ...
Loading ...