Makita ADCU10SM1 INSTRUCTION MANUAL

Loading ...

ENGLISH

4. Keep holding the guide bar lightly and

tighten the sprocket cover. Make sure that the

saw chain does not loose at the lower side.

5. Tighten the retaining nut to secure the

sprocket cover.

Fig.15

► 1. Retaining nut

Make sure the saw chain ts snugly against the

lower side of the bar.

Spike bumper

Optional accessory

When cutting thick branches, using the spike

bumper is recommended. To install the spike

bumper, perform the following steps:

1. Remove the sprocket cover, saw chain, and

guide bar.

2. Align the holes of the spike bumper with the

holes on the chain saw body, and then tighten

the screws rmly.

Fig.16

► 1. Screw 2. Spike bumper

OPERATION

Lubrication

Saw chain is automatically lubricated when the tool is

in operation. Check the amount of remaining oil in the

oil tank periodically through the oil inspection window.

To rell the tank, lay the chain saw on its side

and remove the oil tank cap. The proper amount

of oil is 140 ml. After relling the tank, make sure

that the oil tank cap is tightened securely.

Fig.17

► 1. Oil tank cap 2. Oil inspection window

After relling, hold the chain saw away from the tree. Start

it and wait until lubrication on saw chain is adequate.

Fig.18

NOTICE: When lling the chain oil for the

rst time, or relling the tank after it has

been completely emptied, add oil up to the

bottom edge of the ller neck. The oil deliv-

ery may otherwise be impaired.

NOTICE: Use the saw chain oil exclusively

for Makita chain saws or equivalent oil

available in the market.

NOTICE: Never use oil including dust and

particles or volatile oil.

NOTICE: When pruning trees, use botanical

oil. Mineral oil may harm trees.

NOTICE: Before the cutting operation,

make sure that the provided oil tank cap is

screwed in place.

Loading ...

Makita ADCU10SM1 Outdoor Adventure™ 18V LXT® 12" Top Handle Chain Saw Kit (4.0Ah)

INSTRUCTION MANUAL - Page 15