Loading ...
Loading ...
Loading ...
35
z Flash operation using the R1C1
7
Setting a channel number on the SU-800 and
SB-R200.
1
Set a channel number on the
SU-800.
Press the [SEL](FUNC.) button to display
channel number (blinking). Press the [W]
or [X] button to change the channel
number. Press the [SEL](FUNC.) button
again and the channel number will stop
blinking. The last channel number to blink
is the one that has been set automatically.
• Select one of the four available channels.
• The channel number blinks during adjustment
and stops after blinking six times unless an
adjustment is made. The last channel number
to blink is the one that has been set
automatically.
2
Set a channel number on the
SB-R200.
Rotate the [CHANNEL] select dial on the
SB-R200 to set the same channel number
as set on the SU-800.
CHANNEL
2
34
1
Loading ...
Loading ...
Loading ...