Loading ...
Loading ...
Loading ...
The front panel menu references
The following table summarizes the front panel keys and menu structure.
Keys
Application
Configure DC voltage measurement, including DCV ratio measurement:
Range: Automatically adjust range (default), 100 mV, 1 V, 10 V, 100 V or 1000V
Aperture PLC: 0.02, 0.2, 1, 10, 100. Default value: 10
Auto Zero: Off or On (default)
Input Z: 10 M Ω (default) or Auto Ω (> 1 G)
DCV ratio: Off (default) or On
Configure DC current measurement:
Terminals: 3 A or 10 A
Range: Auto, 100 µA, 1 mA, 10 mA, 100 mA, 1 A, 3 A or 10 A (Terminals set to 10 A).
Aperture PLC: 0.02, 0.2, 1, 10, 100. Default value: 10
Auto Zero: Off or On (default)
Configure AC voltage measurement:
Range: Automatically adjust range (default), 100 mV, 1 V, 10 V, 100 V or 750 V
AC Filter: >3 Hz, >20 Hz, >200 Hz
Configure AC current measurement:
Terminals: 3 A or 10 A
Range: Auto, 100 µA, 1 mA, 10 mA, 100 mA, 1 A, 3 A or 10 A(terminal set to 10 A)
AC Filter: >3 Hz, >20 Hz, >200 Hz
Configure 2-wire resistance measurement:
Range: 100 Ω, 1 kΩ, 10 kΩ, 100 kΩ, 1 MΩ, 10 MΩ or 100 MΩ
Note: The approximate current sourced for each range (for example, ~1mA) is shown on
each range softkey.
Loading ...
Loading ...
Loading ...