Loading ...
Loading ...
Loading ...
10
Do not set up the device in a hot, wet or extremely damp environment or near flammable
material.
The electrical socket must be easily accessible so that the power lead can be disconnected
easily, in the case of an emergency.
The installation and assembly of this device in non-stationary setup locations (e.g. on ships)
must be carried out by specialist companies / electricians, provided they guarantee the
prerequisites for the safe use of this device.
3.6 Electrical connection
In order to ensure the safe and trouble-free operation of the device, the following instructions
must be observed for the electrical connection:
Before connecting the device, compare the connection data (voltage and frequency) on the
rating plate with those of your electrical network. This data must agree in order that no
damages occur in the device. If in doubt, ask your qualified electrician.
The connection between the device and the electrical network may employ a 3 meter long
(max.) extension cable with a cross-section of 1.5 mm². The use of multiple plugs or gangs
is prohibited because of the danger of fire that is involved with this.
Make sure that the power cable is undamaged and has not been installed under the device
or over hot or sharp surfaces.
The electrical outlet must be protected by a 16A safety cut-out switch.
The electrical safety of the device is only guaranteed if the device is connected to a properly
installed protective conductor system. If in doubt, have the house installation checked over
by a qualified electrician. The manufacturer cannot be made responsible for damages that
are caused by a missing or damaged protective conductor.
3.7 Warning notices
Attention
Danger due to hot surface!
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
3.8 Rating plate
The rating plate with the connection and performance data can be founded on the bottom of
the unit.
4 Design and Function
This chapter provides you with important safety notices on the design and function of the
device.
Loading ...
Loading ...
Loading ...