Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
customerser[email protected] or visit our website at www.katadyn.com
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Using the Katadyn BeFree improperly or drinking untreated water can result in
exposure to harmful microorganisms and an increased risk of diseases. Reduce
your risk of becoming sick by following the warnings and instructions in this
manual and by educating yourself on backcountry/travel illness prevention.
YOU ARE RESPONSIBLE FOR YOUR OWN SAFETY AND THOSE IN YOUR
GROUP. PLEASE USE GOOD JUDGEMENT.
Improper use of the Katadyn BeFree or use of a damaged or contaminated
EZ-Clean Membrane™ expose you to harmful microorganisms and increase
your risk of contracting a gastrointestinal illness. Read this entire manual before
assembling or using the Katadyn BeFree and follow all instructions carefully. If
you have any questions, contact Katadyn at +41 44 839 21 11 or email us at
- The Katadyn BeFree does not remove viruses.
- Never use the Katadyn BeFree to filter seawater or brackish water or
chemically contaminated water, such as water from mine tailing ponds or
near large agricultural operations. The Katadyn BeFree does not make
drinkable water from these sources and does not remove chemicals and
radioactive materials or particles smaller than 0.1 microns.
- Do not use in freezing conditions (a frozen EZ-Clean Membrane™ could lead
to microorganism bypass, resulting in illness)
- Improper threading of the cap to the water bag could cause fluid leakage
and result in illness.
- Do not hold or squeeze the EZ-Clean Membrane
TM
with your hand while
opening or closing the Katadyn BeFree (as showing in the diagram on the
next page). Carefully hold the thread of the flask when opening or closing the
Katadyn BeFree, allowing the EZ-Clean Membrane
TM
to rotate freely inside
the bag. Holding or squeezing the EZ-Clean Membrane
TM
while opening
or closing the Katadyn BeFree could result in damage or breakage to the
filter membrane, thus compromising/damaging the filter (which could allow
harmful microorganisms to bypass the filter, leading to illness).
Ensure filter cartridge is properly tightened into the water bag (see figure 2).
Fill bag with water using a separate container. If a separate container is
not available, open bag and fill directly from water source. Do not allow
contaminated water to contact outlet connection or end of outlet hose. (see
figure 4)
Elevate water bag in convenient
location. For best flow, position
the filter in an upright position
and hang from the highest
possible location.(see figure 6).
Close the on/off output hose
clamp. Connect the output hose
to the female quick connect at
the filter cap (this will initiate
water flow into the output hose).
Open on/off output hose clamp
to begin water flow. Close on/off
output hose clamp to stop water
flow. Ensure on/off output hose
clamp is in wide open position
(not pinching hose whatsoever)
while filtering to ensure maximum
flow rate.
After filtration attach the output
hose to the adapter ring to avoid
contact of the hose outlet with the
ground (see figures 7).
Remove output house from the cap by disconnecting the quick connection
system. As long as the output hose is not attached to the filter cap, the
integrated quick connection valve is closed, turning off the water flow. Once
output hose is reconnected, the quick connect valve will be opened and water
will begin flowing. (see figure 3).
The Katadyn BeFree requires minimal setup. For best results, try out the product
before first use and familiarize yourself with its operation.
1. Assemble the Katadyn BeFree as shown in figure 1.
2. Flush system by running filtered or treated water through the EZ-Clean
Membrane™ (hollow fiber) to remove harmless particles and dust. See
following section on Normal Operation on how to filter water.
Figure (3)
Figure (4)
IMPORTANT SAFETY MESSAGEWARNINGS WARNINGS (continued) KEY COMPONENTS IN SYSTEM
NORMAL OPERATION
NORMAL OPERATION
(continued)
NORMAL OPERATION (continued)
NORMAL OPERATION (continued)PRODUCT SETUP
- If the Katadyn BeFree has been dropped into a fresh water source, follow
instructions for long term storage to completely disinfect filter before use. If
the Katadyn BeFree is damaged or contaminated, do not use.
- Do not allow fresh water to contaminate the output parts (female quick
connect and top of the EZ-Clean Membrane
TM
).
- To minimize risk, when filtering water, do not splash dirty or fresh water on
the filter cap. Do not drink directly from the output hose.
- Dry off outside of the water bag and output hose to avoid fresh
water running down bag/hose into your water container.
- Do not filter any substance or liquid other than fresh water through your
Katadyn BeFree or the EZ-Clean Membrane™ may become damaged or
contaminated.
- Before long term storage, disinfect the EZ-Clean Membrane™ thoroughly to
prevent growth of mold, mildew and bacteria which could cause illness (see
Long Term Storage)
- Do not use dishwasher or microwave to disinfect the EZ-Clean Membrane™
or the filter cap. Doing so will damage or melt the parts from high heat.
- Always seek the best fresh water source available.
- Always handle the Katadyn BeFree filter carefully.
- Extend your filter’s lifespan by using one of the following EZ Clean options:
SHAKE or SWISH every 5-10 liters (see Performance Tips).
- On extended trips, bring along a Katadyn Replacement EZ-Clean
Membrane™.
- READ, UNDERSTAND AND FOLLOW ALL instructions and warnings in this
manual before using the Katadyn BeFree. Failure to follow all warnings and
instructions may result in exposure to harmful microorganisms and illness.
IMPORTANT: To minimize the risk of illness, dry off outside of bag and
outlet hose to prevent untreated water from running down bag/hose and
into your water container. Improper use of filter can lead to contamination
and illness. To minimize risk, when filtering water, do not splash dirty or
unfiltered water into clean container and follow all of the instructions in
this manual.
WARNINGS (continued)
A)
C)
E)
F)
B)
Do not hold or squeeze the EZ-Clean Membrane™ with your hand while
opening or closing the Katadyn BeFree
Do not rinse the EZ-Clean
Membrane™ horizontally
under running water –
doing so may destroy the
hollow fibers
Do not touch the hollow fibers with a
tool or with your fingers.
Figure (1) Key Components
Figure (6)
IMPORTANT: Do not hold or squeeze the EZ-Clean Membrane™ with your
hand while opening or closing the Katadyn BeFree
Read before using Katadyn BeFree
When you travel abroad, camp or backpack, you run the risk of illness ranging
from the inconvenience and discomfort of diarrhea to more serious illnesses
caused by protozoan cysts (i.e., Giardia, Cryptosporidium), viruses and
bacteria.
The microorganisms that cause these diseases are often found in the food and
water you consume.
Lakes, rivers, streams and the local water supply may also be contaminated.
To minimize the risk of contracting these illnesses, we suggest that you consult
with your physician, state health department or travel clinic 4-6 weeks before
you depart.
And while you are traveling, make sure that prepared food is thoroughly cooked
according to its specified instructions. Select non-cooked foods (fruits, nuts, etc.)
that have intact shells or skins, and always sanitize your hands properly before
peeling the food. Wash your hands with soap and warm water thoroughly and
often (and use hand sanitizer), especially before you eat or prepare food. Also,
in groups encourage everyone to wash their hands frequently. Microorganisms
can spread to communal gear from one group member not sanitizing their
hands properly. Do not share personal items (i.e. lip balm, eating utensils,
toothbrushes, water bottles or bite-valves on hydration bladders). Make sure all
food is properly prepared and thoroughly cooked. Filter all drinking water with
your Katadyn BeFree, including water used for brushing teeth, washing your
face, etc. according to the instructions in this manual.
If there is any risk of viruses in the water, use an EPA-registered disinfectant
such as Katadyn Micropur MP1 Purification Tablets, Micropur Forte or Micropur
Quick (outside USA/Canada), in combination with the Katadyn BeFree (Note:
Follow all instructions for proper use of Micropur and wait the appropriate
treatment time) or boil your water (must bring to a rolling boil for approx. 1
minute) (Note: The Katadyn BeFree does not remove viruses).
NORMAL OPERATION (continued)
Figure (5)
Close bag by folding ends. Dry bag and outlet connector with clean cloth.
(see figure 5).
D)
G)
Figure (7)
(1) Water Bag with Hang/Carry Strap
(2) Adapter Ring
(3) EZ-Clean Membrane™ (hollow fiber)
(4) Filter Cap with built-in Female Quick Connect
(5) Output Hose
(6) On/Off Output Hose Clamp
(7) Male Quick Connect
Figure (2)
1
3
2
4
5
6
7
7
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
Germany: customerser[email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
Please take a moment to register your new Katadyn product by completing the
short product registration form online at www.katadyngroup.com. You will find
„Product Registration“ as part of the „Services“ section in the website navigation.
The information you provide by registering your product will enable us to
develop further products which meet your needs and interests.
Additionally you can register to receive information about new products of the
Katadyn Group Brands.
E) How to get service
To receive coverage under this warranty, please return your Katadyn BeFree
to the retailer where you purchased the product for repair or replacement.
If you are not completely satisfied with the service you receive from your
retailer, or if you have any questions regarding this warranty, please contact
Katadyn Customer Service by telephone, email or in writing at:
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Local Katadyn Group customer service contacts:
USA: +1 800 755 67 01 / [email protected]
F) How state law applies
This warranty gives you specific legal rights. You may also have other rights
which vary from state to state.
2 YEAR LIMITED WARRANTY on Katadyn BeFree
A) What is covered
Your Katadyn BeFree is warranted to be free from defects in materials and
workmanship.
B) How long warranty coverage lasts
This warranty lasts two years from the date of purchase of your Katadyn
BeFree. All implied warranties under state law are also limited to two years
from the date of purchase. Some states do not allow limitations on how long
an implied warranty lasts, so the above limitation may not apply to you.
C) What Katadyn will do
In the event of a defect in material or workmanship within the two-year
warranty period, Katadyn will either repair or replace your Katadyn BeFree,
at Katadyn’s sole discretion.
D) What is not covered
This warranty does not cover any damage caused by product misuse, abuse
or failure to follow instructions provided herein for proper use, maintenance,
cleaning or storage. This warranty also does not cover, and expressly
excludes coverage for, any incidental or consequential damages arising out
of the purchase, use or performance of the product. Some state laws do not
allow exclusion or limitation of incidental or consequential damages, so the
above exclusion or limitation may not apply to you.
The life span of the EZ-Clean Membrane™ depends on water quality. To
extend life of your EZ-Clean Membrane™, clean it regularly. For optimum filter
performance replace the EZ-Clean Membrane™ after 1000 liters or 264 gallons
or if water flow has slowed or stopped (review Performance Tips to ensure best
product performance).
Replacement EZ-Clean Membrane™ Installation
Katadyn BeFree Replacement EZ-Clean Membranes™ are available from the
dealer where you purchased your Katadyn BeFree.
To replace your EZ-Clean Membrane™ twist it in a counter-clockwise motion and
remove the EZ-Clean Membrane™ from the adapter ring. Install new EZ-Clean
Membrane™ by screwing it into the adapter ring in a clockwise motion.
FILTER CARTRIDGE CAPACITY & REPLACEMENT
LONG TERM STORAGE (continued)
PERFORMANCE TIPS (continued)PERFORMANCE TIPS (continued)PERFORMANCE TIPS
To extend the life of your EZ-Clean Membrane™, always use the best available
fresh water source. Avoid still water or water in areas of heavy human or
animal use.
Maintain your Katadyn BeFree to keep it operating properly.
A) If the Katadyn BeFree leaks near the cap
Unscrew the filter and screw it back on. Make sure that you position the filter
straight on the thread of the adapter ring and the water bag and tighten it
firmly.
B) If the Katadyn BeFree is dropped hard, check the hollow fibers visually and
perform the filter integrity test to make sure the fibers are ok.
IMPORTANT: Do not touch the hollow fibers with a tool or with your
fingers. (See WARNING section)
Congratulations on your purchase of the Katadyn Gravity BeFree
(hereinafter referred to as Katadyn BeFree). When used properly in accordance
with the instructions provided in this manual, this product is designed to reduce
the levels of bacteria and protozoan cysts commonly found in fresh water
sources to make it safer for drinking. It meets the U.S. Environmental Protection
Agency’s microbiological water purifier standards for reduction of bacteria
(99.9999% Klebsiella terrigena) and protozoan cysts (99.9% Giardia and
Cryptosporidium). It is for hiking, camping in the wilderness or traveling in areas
where treated water is unavailable.
Water definitions as used in this manual
Fresh water = Untreated water (Lakes, Rivers, Streams, etc.)
Filtered fresh water = Potable drinking water
Treated water = Treated tap water or chemically disinfected water, or boiled
disinfected water
INTENDED USE OF THE KATADYN BEFREE
PRODUCT REGISTRATION
KATADYN BEFREE LIMITED WARRANTY
(continued)
KATADYN BEFREE LIMITED WARRANTY
PRODUCT SPECIFICATIONS
C) If water flow is slow:
Check Output Hose: Ensure on/off output hose clamp is in the wide open
position, not pinching the hose whatsoever. Ensure output hose quick connect
is securely connected to the quick connect on the filter cap or water will not
flow into output hose.
Clogged Outlet Valve: Unscrew the filter cap counterclockwise from the EZ-
Clean Membrane
TM
. Swish filter cap in filtered/treated water to remove any
sediment from connection. Add the output hose and flush the filter cap and
the hose with filtered/treated water. If clean water is unavailable, flush the
system with the first liter of treated water when you start filtering water again.
Clean EZ-Clean Membrane
TM
: Use ONE of the EZ Clean steps (Shake, Swish)
printed on the outside of the water bag:
Shake
Fill the water bag with fresh water & shake to easily clean the EZ-Clean
Membrane™ in the field
-OR-
Swish
Remove the filter and swish in any fresh water source to clean in the field (Note:
DO NOT allow the filter cap and top of the filter to contact contaminated water
sources).
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
If these steps fail to restore water flow, replace EZ-Clean Membrane™.
-> On extended trips, bring along an EZ-Clean Membrane™ Replacement.
D) Trapped air in the EZ-Clean Membrane™ may also reduce flow rates.
Fill the water bag with a small amount of fresh water, close the system and
disconnect output hose. Shake the system, reconnect output hose and squeeze
the water bag until the air goes through the EZ-Clean Membrane™.
D) Disassemble all components, rinse them with filtered or treated water and
allow them to air dry completely.
E) Reassemble the system and store inside carry bag.
Note: When removing the Katadyn BeFree from long-term storage, flush the
system with 2 liters of filtered or treated water to remove any stale tasting water.
Flow Rate: Up to 2L of water per minute
Filter Capacity: Up to 1,000L, depending on water quality
Weight: Katadyn BeFree Gravity 6.0 L: 298 g
Katadyn BeFree Gravity 10 L: 317 g
Dimensions: Katadyn BeFree Gravity 6.0 L : 48 x 43 x 12 cm
Katadyn BeFree Gravity 10 L : 58 x 43 x 12 cm
LONG TERM STORAGE (after your trip is over)
Disinfect your Katadyn BeFree before storage to prevent microbiological growth
within the filter system.
A) Fill a container with 2L of filtered or treated water and add 1 Micropur Tablet
per liter. (If not available, use 4 drops of ordinary household bleach.)
B) Pour the solution into the water bag.
C) Hang your Katadyn BeFree Gravity and allow the entire amount of solution to
run through EZ-Clean Membrane
TM
(into sink or container) to disinfect filter,
hoses, water bag etc.
Filter Integrity Test
If you suspect that your Katadyn BeFree may have been damaged in some
way, you can perform this quick and easy integrity test in the field.
1. Squeeze fresh water through the Katadyn BeFree
IMPORTANT: The integrity test only works with a wet EZ-Clean
Membrane™.
2. Try to blow air - using your mouth - through the output hose into the
water bag.
-> cannot blow through filter = fiber ok
-> can blow through filter = fiber broken
Stop: DO NOT USE FILTER! Replace EZ-Clean Membrane™
3. Clean output hose after integrity test according to section 8 (Long Term
Storage)
Print No. 8020909/0
Shake Swish
IMPORTANT: Do not rinse the EZ-Clean Membrane™ horizontally under
running water. (See WARNING section)
Log on to our website to learn more about our full line of products including
all our solutions for water treatment, self-sufficient nutrition and outdoor
cooking.
www.katadyngroup.com
Katadyn Products Inc.
Pfäffikerstrasse 37
8310 Kemptthal
Switzerland
Phone: +41 44 839 21 11
customerser[email protected]
Katadyn BeFree Gravity 6.0 L
Katadyn BeFree Gravity 10 L
EN
