Loading ...
Loading ...
Loading ...
10
2) This warranty does not apply to damages caused by improper use, accident, flood, lightning, or if the product was
altered or repaired by anyone other than the Manufacturer’s Service Center.
3) konnwei shall not be liable for any incidental or consequential damages arising from the use, misuse, or mounting of
the code reader. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations
may not apply to you.
4) All information in this manual is based on the latest information available at the time of publication and no warranty
can be made for : its accuracy or completeness. Konnwei reserves the right to make changes at any time without notice.
2.9 Service Procedures
If you have any questions, please contact your local store, distributor or visit our website at www.konnwei.com
If it becomes necessary to return the code reader for repair, contact your local distributor for more information.
3.0 Safety Precautions and Warnings
To prevent personal injury or damage to vehicles and/or the code reader, read this instruction manual first and observe the
following safety precautions at a minimum whenever working on a vehicle:
Always perform automotive testing in a safe environment.
Wear safety eye protection that meets ANSI standards.
Keep clothing, hair, hands, tools, test equipment, etc. away from all moving or hot engine parts.
Operate the vehicle in a well ventilated work area: Exhaust gases are poisonous.
Put blocks in front of the drive wheels and never leave the vehicle unattended while running tests.
Use extreme caution when working around the ignition coil, distributor cap, ignition wires and spark plugs. These
components create hazardous voltages when the engine is running.
Put the transmission in PARK (for automatic transmission) or NEUTRAL (for manual transmission) and make sure
the parking brake is engaged.
Keep a fire extinguisher suitable for gasoline/chemical/ electrical fires nearby.
Don’t connect or disconnect any test equipment while the ignition is on or the engine is running.
Keep the code reader dry, clean, free from oil/water or grease.
Use a mild detergent on a clean cloth to clean the outside of the code reader, when necessary.
Loading ...
Loading ...
Loading ...