Loading ...
Loading ...
Loading ...
8
Cabinet Dimensions
Cabinet opening dimensions shown are for 25" (64.0 cm) countertop depth, 24" (61.0 cm) base cabinet depth and 36" (91.4 cm)
countertop height.
IMPORTANT: If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood
combination installation instructions for dimensional clearances above the cooktop surface.
Range may be installed next to combustible walls with zero clearance.
NOTE: When installed in a slide-in cutout, the front of oven door may protrude beyond the base cabinet.
Slide-In Cutout Freestanding Cutout
A. For minimum clearance to top of cooktop, see NOTE*.
B. 13" (33 cm) maximum upper cabinet depth
C. 30" (76.2 cm) minimum opening width
D. Remaining counter depth should not exceed 2
1
/
4
" (5.7 cm).
E. In U.S.A. and Canada: 30" (76.2 cm) min. opening width
F. The shaded area is recommended for installation of grounded outlet.
G. 13
1
⁄
8
" (33.3 cm)
H. 7
11
⁄
16
" (19.5 cm)
I. 4
13
⁄
16
" (12.2 cm)
J. 3
11
⁄
16
" (9.4 cm) plus measurement of L
K. Cabinet door or hinges should not extend into the cutout.
A. For minimum clearance to top of cooktop, see NOTE*.
B. 13" (33 cm) maximum upper cabinet depth
C. 30" (76.2 cm) minimum opening width
D. Cabinet door or hinges should not extend into the cutout.
E. In U.S.A. and Canada: 30" (76.2 cm) min. opening width
F. The shaded area is recommended for installation of grounded outlet.
G. 13
1
⁄
8
" (33.3 cm)
H. 7
11
⁄
16
" (19.5 cm)
I. 4
13
⁄
16
" (12.2 cm)
J. 3
11
⁄
16
" (9.4 cm)
*NOTE: 24" (61.0 cm) minimum when bottom of wood or metal cabinet is shielded by not less than 1/4" (0.64 cm) flame retardant
millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020"
(0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an uncovered wood or metal cabinet.
Loading ...
Loading ...
Loading ...