Loading ...
Loading ...
Loading ...
Automatic safety cut-out en
9
When the time has elapsed
When the time has elapsed, you will hear an audible
signal and
‹‹ flashes in the timer display for 10
seconds. h above the t symbol flashes. Touch any
symbol. The displays go out and the audible signal
ceases.
Setting the correct time
Use the t symbol to select the kitchen timer and reset
the time.
Stopwatch function
The stopwatch function displays the time which has
passed since activating the function.
The stopwatch function only works when the hob is
switched on. When the hob is switched off, the
stopwatch function is switched off as well.
The stopwatch function is switched on by touching the
x symbol.‹‹ appears in the timer display and timing
starts. Seconds are displayed during the first minute,
and then minutes.
Touching the x symbol stops the stopwatch. Touching
the x symbol one more time switches off the
stopwatch function. The timer display goes out.
bAutomatic safety cut-out
Au t o mat i c saf et y cut - out
If a hotplate has been switched on for a long time
without the setting being changed, the automatic time
limit is activated.
The hotplate stops heating. ”‰ and the •/œ residual
heat indicator flash alternately on the hotplate display.
The display goes out when you touch any control. You
can make new settings.
When the time limit is activated depends on the heat
setting selected (1 to 10 hours).
zKeep warm function
Ke e p wa r m function
The Keep warm function is suitable for melting
chocolate or butter and for warming food and cookware
Switching on the Keep warm function
1. Select the hotplate.
2. Touch the Û symbol. –© lights up on the heat
setting display.
The Keep warm function is switched on.
Switching off the Keep warm function
1. Select the hotplate.
2. Touch the Û symbol. ‹ lights up on the heat
setting display.
The Keep warm function is switched off.
kWipe protection
Wipe pr ot ec t i on
If you wipe over the control panel while the cooktop is
switched on, settings may be altered.
To prevent this from happening, your cooktop has a
wipe protection function. Touch the >Š symbol. An
audible signal sounds. The > display above the >Š
symbol lights up. The control panel is locked for
30 seconds. You can now wipe over the control panel
without altering any settings.
Note: The main switch is excluded from the wipe
protection function. You can switch off the cooktop at
any time.
[Energy consumption
indicator
En e r gy cons umpt i on indicator
You can use this function to have the total energy
consumption between switching the hob on and off
displayed.
Once switched off, the consumption in kilowatt hours
(e.g. 1.87 kWh) is displayed for 10 seconds
The accuracy of the display depends, amongst other
things, on the voltage quality of the power supply.
The display has not been activated. You can find out
how to activate the display in the Basic settings
section.~ Page 10
Loading ...
Loading ...
Loading ...