Loading ...
Loading ...
Operating your Fan
WARNING Keep all objects at least 1 metre
from the front, sides and rear of the
appliance.
You will need to fit the soft blade to the
spindle of the fan. Press the blade onto the
spindle until it is on as far as it will go.
Place the Fan on a dry, level and sturdy
surface.
Connect the USB cord to the power source, i.e.
computer, adaptor, etc.
To operate the fan, flick the switch to the ON
position.
To turn off fan, flick switch to OFF position.
Adjust tilt by moving the main housing on the
stand to change to desire wind direction (i.e.
either upward or downward).
IMPORTANT! NEVER COVER THIS APPLIANCE!
Cleaning:
To avoid risk of electric shock, before cleaning,
you MUST ALWAYS switch off and unplug the
fan before cleaning.
Use only a soft, damp cloth to gently wipe the
fan and dry well.
Do not immerse the fan in water and never
allow water to enter the motor housing.
Do not use harsh chemicals to clean the fan.
If an object causes interference to the rotation
of the blade accidently, it will automatically
stop turning. Once the object is removed, the
blade will resume turning again after a few
seconds.
Always choose a safe location for the fan, keeping in mind the safety precautions outlined.
Ensure all packaging has been removed from the unit before use. This appliance requires no
installation, it should be used solely as a portable appliance.
SUPPORT AND TECHNICAL ADVICE
PROOF OF PURCHASE
To receive warranty retain receipt as proof of purchase. (Refer to back of booklet).
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9365 5100
Phone 1300 465 324
Loading ...