Loading ...
Loading ...
Loading ...
43
MAINTENANCE
ENGLISH
3
Push the pipe into the water fitler cap, making
sure the end is fully sealed.
4
Tighten the screw cap until the colored line in
the water filter is no longer visible.
5
Press and hold the
Water Filter
button for
three seconds. That resets the
Replacement
Filter
icon. The new water filter has been
activated.
6
Dispense water for approximately 5 minutes to
remove trapped air and contaminants from the
system.
Push fit connector type
*1
1
Remove the screw cap.
2
Pull the pipe out from the water fitler.
3
Push the pipe into the water fitler, making sure
the end is fully sealed.
4
Insert the screw cap until the colored line in the
water filter is no longer visible.
5
Press and hold the
Water Filter
button for
three seconds. That resets the
Replacement
Filter
icon. The new water filter has been
activated.
6
Dispense water for approximately 5 minutes to
remove trapped air and contaminants from the
system.
CAUTION
• Failure to replace filters when required or using
non LG authorised water filters can cause the
filter cartridge to leak and result in property
damage.
Application Guidelines/Water
Supply Parameters
• Service Flow: 1.9 lpm
• Water Supply: Community or Private Well -
Potable Water
• Water Pressure: 138 - 827 kPa
• Water Temperature: 0.6 - 37.8 °C
• Capacity: 1892 litres
Loading ...
Loading ...
Loading ...