Loading ...
Loading ...
Loading ...
Flex Zone en
13
|Flex Zone
Fl e x Zone
You can use each flex zone as a single hotplate or as
two independent hotplates, as required.
It consists of four inductors that work independently of
each other. If using the flexible cooking zone, only the
area that is covered by cookware is activated.
Advice on using cookware
To ensure that the cookware is detected and heat is
distributed evenly, correctly centre the cookware:
As two independent hotplates
The flexible cooking zone is used like two independent
hotplates.
Activating
See section ~ "Operating the appliance"
As a single hotplate
Using the entire cooking zone by connecting both
hotplates.
Linking the two hotplates
1. Set down the cookware. Select one of the two
hotplates in the flexible cooking zone and set the
heat setting.
2. Touch the è symbol. The indicator will light up.
The heat setting will be lit on the displays for the two
hotplates.
The flexible cooking zone has now been activated.
Changing the heat setting
Select one of the two hotplates in the flexible cooking
zone and use the @ or A symbol to set the heat setting.
Adding a new item of cookware
Set the new item of cookware down on the cooker,
select one of the two hotplates in the flexible cooking
zone and then touch the è symbol twice. The new item
of cookware will be detected and the heat setting that
was previously selected will be retained.
Note: If the cookware is moved to the hotplate being
used or lifted up, the hotplate begins an automatic
search and the heat setting selected previously is
retained.
Disconnecting the two hotplates
Select one of the two hotplates in the flexible cooking
zone and touch the è symbol.
This deactivates the flexible cooking zone. The two
hotplates will now function independently.
Note: If you switch the hob off and then subsequently
switch it on again, the flexible cooking zone is
converted back to two independent hotplates.
As a single hotplate
Diameter smaller than or equal to 13 cm
Place the cookware on one of the four posi-
tions that can be seen in the illustration.
Diameter greater than 13 cm
Place the cookware on one of the three
positions that can be seen in the illustration.
If the cookware takes up more than one
hotplate, place it starting on the upper or
lower edge of the flexible cooking zone.
As two independent hotplates
The front and rear hotplates each have two induc-
tors and can be used independently of each other.
Select the required heat setting for each of the
hotplates. Use only one item of cookware on each
hotplate.
Loading ...
Loading ...
Loading ...