Loading ...
Loading ...
Loading ...
sponding menu is on for a long time, triangle symbol is flashing, and oth-
er irrelevant menus are not on. Time and temperature symbols are always
on.
2-3. The internal cooling fan outputs 12V voltage to control the fan
(1.8W) to rotate. When the program is finished, the fan will continue
to rotate for 3 minutes before the end of operation. When the cooling
fan does not work, the display board and program control stop work-
ing.
3) The working mode button is shown in the figure below。
3-1. Press this menu button， Use this selected knob,
twist it which can choose menu, and display in the corresponding
menu flashing. Move one table for each grid of menu
3-2. After selecting the menu, press the stop/start button to
start the work menu. Then press the button to stop the work. Every
time the button is pressed, the buzzer will ring, Press and sound.
3-3. Press the button to start lighting work, then press the
button, the inside lamp is off, the icon is displayed, and so on. And
the lighting button is always valid after the product is turned on.
3-4. Press the temperature key to adjust the operating tempera-
Loading ...
Loading ...
Loading ...