Evaporative
Filter
Arctic Air
™
Tower 2.0
READ ENTIRE MANUAL BEFORE USE
Congratulations!
Thanks for buying Arctic Air
™
Tower 2.0 – the powerful room cooler that pulls in hot air
through its evaporative air-cooling lter and turns it into cool, refreshing air... instantly!
Experience the cooling comfort of Arctic Air
™
Tower 2.0.
If you have any questions or problems, go to:
www.ArcticAirTowerFAQ.com
If you can’t nd the answer or do not have access to the internet,
call our customer service line Monday-Friday 9am to 6pm EST:
1-888-611-6750
WHAT’S INCLUDED:
Control
Panel
Easy
Removal Slot
Removable
Front Grill
Easy View
Water Level
Base
Water Tank Drawer
Ice Boost
ASSEMBLY
1. Place Arctic Air
™
Tower 2.0 down so that
the front grill is facing up while base is being
assembled.
3. Align the assembled Base with the Arctic Air
™
Tower 2.0. Pull the Power Cord through the hole
in the center of the assembled Base.
2. Assemble the two Base halves by inserting the
tabs on one half into the slots on the other half.
12
12
BASE
D
D
D
D
D
TOWER
C
C
C
C
C
4. Insert Tower Pegs (C) into Base Slots (D)
and turn the Base clockwise (towards to the
LOCK symbol) until it locks in place.
5. Pull the excess slack of the Power Cord
through the hole. Plug the cord into a wall-outlet.
USAGE:
FILLING THE TANK
Pull out the drawer on the backside of the unit. Using
a pitcher or other container, ll until MAX line. Be sure
to at least ll until over MIN line or water pump will
not function properly.
For Best Results, use cold water and/or ice boost.
USING ICE BOOST:
For Best Results, We recommend freezing and placing Ice Boost in water tank
prior to lling to avoid overlling and spilling. This will also help cool your
water down quicker, for faster, better results.
1. Unscrew top from ice pack and place aside.
Fill with cold water and place in freezer
until frozen.
2. When Ice Boost is frozen, open the drawer
and slide into the slot as shown.
3. Repeat as needed when Ice Boost is no
longer cold.
Light brightness can be adjusted to be dimmer or
brighter based on your preference. Lights default
to high brightness, & when button is pressed,
brightness can be adjusted to half-brightness, or off.
FAN SPEED
LIGHT SETTINGS
TIMER
OSCILLATION
Arctic Air
™
Tower 2.0 has 3 fan speeds - High,
Medium, and Low. To set desired speed,
press the button on the top control panel.
You can set an auto-off timer for 2, 6, 8, or 12 hours.
Simply press the button until your duration
is selected. To cancel, press until no longer lit.
Arctic Air
™
Tower 2.0 also has wide-coverage
oscillation built-in. Press the button once for
continuous oscillation, or press again to stop the unit
where it is currently is.
USAGE (CONT.):
2h
6h
8h
12h
2h
6h
8h
12h
TURBO MODE
Press the + button to start TURBO mode for
maximum airow and cooling.
MAINTENANCE:
Web: www.ArcticAirTowerFAQ.com
Call: 1-888-611-6750
Email: ArcticAirT[email protected]
To Order A New Filter
or Customer Service:
We recommend weekly cleaning of your Arctic Air
™
Tower 2.0 and lter to keep in best
working condition, and replacing the lter every 3-6 months.
DISHWASHER: Place lter in the
top-rack of your dishwasher & run
cycle normally. Remove and let
air dry.
HAND WASH: Hand wash
gently with warm water & soap.
Shake out excess water & let
air dry.
FILTER
To access lter remove front grill by pressing tab on
the top of the grill – place aside. Using the nger
cut-out on the top of the lter, pull the lter towards
you and remove.
IMPORTANT: If you see mold on the lter or notice a musty smell, stop and clean
the lter before further use. Soak the cartridge with equal parts clean water and white
vinegar – allow to sit for 45-60 minutes. Rinse with warm water, wring out and let air dry.
UNIT CLEANING
• To prepare for cleaning, run Arctic Air
™
Tower 2.0 until all water has emptied from the water
tank, or hold Arctic Air
™
Tower 2.0 over a sink and carefully dump out to avoid splashing
or spilling.
• If you notice water tank is dirty, use a small, bendable brush (i.e. toothbrush, bottle brush, etc)
and carefully clean the inside of the tank until clean. Rinse clean with warm water.
OROR
• Do not carry Arctic Air
™
Tower 2.0 when lled with water. Some water may remain in unit even if tank is empty.
• Use only clean water. If needed, use distilled water.
• Please read and follow regular maintenance as recommended in “Maintenance” section of this guide.
• Arctic Air
™
Tower 2.0 works best in non-polluted areas. Large dust/dirt particles may reduce lifetime of unit.
• We recommend use only in dry locations. If using in a moist area or environment, take care not to get water on external
areas of the product.
• If a leak or spill occurs on the surface of device, unplug Arctic Air
™
Tower 2.0 and let it dry for 24 hours. Then, use
as normal.
• Do not place in direct sunlight for extended periods of time.
• Before not using Arctic Air
™
Tower 2.0 for extended periods of time, empty the water tank, turn unit on, and set to
highest fan speed for at least 4 hours. This will dry out then lter and inside of your unit.
• Only use the original power adapter and cord supplied in package.
• Do not touch the power supply or power cord with wet hands.
• Unplug Arctic Air
™
Tower 2.0 when cleaning, removing/replacing lter, or moving the device.
• For best results, place Arctic Air
™
Tower 2.0 on a higher surface like a table or countertop.
• Do not place Arctic Air
™
Tower 2.0 near a heater or any electrical equipment.
• Do not place the device in passageways or high trac areas where there is a possibility of tripping or knocking it over.
• Do not allow any foreign objects inside Arctic Air
™
Tower 2.0.
• Do not place items on top Arctic Air
™
Tower 2.0.
• Do not block the front and back grills of the device.
• Do not turn the device upside down.
• Do not submerge the Arctic Air
™
Tower 2.0 under water or other liquids.
• Do not place Arctic Air
™
Tower 2.0 near open ames or re sources.
• People with limited physical, visual or mental abilities or lacking proper experience and/or knowledge should never use
the device without supervision of those responsible for their safety or those capable of assistance in using the device.
• The device can be switched off completely only when disconnected from the power supply.
• The manufacturer does not bear any responsibility for any damage from failure to comply with this product guide.
• A replaceable water lter is designed specically for this product. If your cartridge has been broken or damaged,
you can purchase a replacement.
ONTEL
®
ASSUMES NO RESPONSIBILITY FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF
THE PRODUCT. IN PURCHASING AND USING THIS PRODUCT, YOU ASSUME ALL RESPONSIBILITY FOR CLEANING THE PRODUCT
AND MONITORING THE PRODUCT FOR MOLD. ADDITIONALLY, ONTEL
®
SPECIFICALLY DISCLAIMS ALL EXPRESSED WARRANTIES NOT
OTHERWISE SET FORTH HEREIN AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF.
WARNINGS:
Distributed by
©2021Ontel Products Corp.
Fairfield, NJ 07004
All Rights Reserved.
Made In China
U.S. Pat No. D948009
U.S. Pat No. D948680
AAT-IM-01-1121-200
FOR HOUSEHOLD USE ONLY
Please Note: You may notice some condensation forming on the front grill. This is normal.
Model Number: 18009
AC100~120V
DC 5V , 1.5-2.0A
1217.0101
FOR BEST RESULTS:
FOR BEST RESULTS:
Place on flat surface & fill tank from
a water pitcher.
DO NOT RETURN TO STORE
We can help! If your product is not
working or if you have any questions:
Web: www.ArcticAirTowerFAQ.com
Call: (888)-611-6750
Email: ArcticAirTower@rephelpdesk.com
FILL WITH PITCHER:
For MAXIMUM POWER, press Turbo
Mode for best cooling and airflow.
Please Note: You may notice some condensation
forming on the front grill. This is normal.
DO NOT USE ARCTIC AIR™ TOWER 2.0 WITHOUT FILTER.
WATER MAY LEAK OUT ONTO FLOOR.
For best results, turn this card over.
To ACTIVATE COOLING, soak your filter
under running cold water.
Fill and Freeze Ice Boost pack prior to
use. Place in water tank prior to filling to
avoid overfilling.
QUICK START GUIDE:
Plug in your Arctic Air™ Tower 2.0
Fill tank with water using a pitcher
Turn on the unit & enjoy!
PRE-SOAK FILTER: USING ICE BOOST:
USING TURBO MODE:
See Product Guide for Care & Cleaning instructions.
