Loading ...
Loading ...
Loading ...
6
1.4.This electric tool is only suitable for dry cutting. Electric shock may occur if
moisture enters power tools.
1.5.If the power tool is still turning, never attempt to remove chips, metal shavings
or similar debris from the cutting area. Be sure to retract the arm before turning off
the power tool.
1.6. After starting the machine, place the saw blade on the work-piece. Otherwise
when the saw blade is stuck in the work-piece, there will be a risk of rebound.
1.7.The wire must be kept away from the rotating tool. Wires can be cut or caught
in a knife.
1.8.Keep the handle dry, clean and free of grease. Greasy handles that are
slippery may make it impossible to control the machine.
1.9.Use only when the working surface (excluding the work-piece to be machined)
does not have all the adjustment tools, metal debris, etc. Small pieces of metal or
other objects that come into contact with the rotating blade can hit the operator at
high speed.
1.10. Keep floors free of metal debris and waste. Avoid slipping or tripping.
1.11.Be sure to fix the workpiece to be processed. Do not work a piece too small
to be fixed. Do not fix the workpiece by hand to prevent accidents.
1.12.Only suitable materials can be cut with this tool. Otherwise, power tools will
be overloaded.
1.13.If the saw blade is stuck, turn off the power tool and hold the workpiece firmly
until the blade completely stopped. To avoid counterattack,One must must wait for
the saw blade to stop turning before moving the workpiece. Before restarting the
power tool, the cause of the stuck saw blade must be checked and the obstacle
removed.
1.14.Do not use a saw blade that has become blunt, cracked, bent or damaged. If
the saw blade becomes blunt, or the sawtooth changes, it will increase the friction
when cutting because the saw seam is too small, and the saw blade is easy to be
clamped and cause a rebound.
1.15.Use a saw blade with a proper joint hole (columns, such as star or quad) and
the correct size. If the saw blade does not fit the socket of the saw, it will skew and
cause the operation to be out of control.
1.16.Saw blades made of high alloy rapid steel (HSS) should not be used. This
kind of saw blade breaks easily.
Loading ...
Loading ...
Loading ...