Loading ...
Loading ...
Loading ...
P a g e |14
ONLINE: TRINITYAPPLIANCES.COM.AU
fig.3
fig.4
Do not use adhesive to fix the hob into the worktop.Once the seal is fitted
position the hob into the cutout in the worktop. Spply gentle downwards
pressure onto the hob to push it into the worktop ensuring a good seal
around the outer edge(fig.4)
4.3 CAUTIONS
1. The ceramic cooker hob must be installed by qualified personnel or
technicians. We have professionals at your service. Please never
conduct the operation by yourself.
2. The ceramic cooker hob must not be mounted to cooling
equipment, dishwashers and rotary dryers.
3. The ceramic cooker hob must be installed in a way for better
heat radiation in order to ensure and enhance its reliability.
4. The wall and induced heating zone above the work surface shall
withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be
resistant to heat.
6. A steam cleaner is not to be used.
7. This ceramic hob can be connected only to a supply with system
impedance no more than 0.427 ohm. In case if necessary, please
consult your supply authority for system impedance information.
4.4 CONNECTING THE HOB TO THE MAIN POWER SUPPLY
All installation work must be carried out by a competent
person or qualified electrician. Before connecting the
main supply, ensure that the mains voltage
corresponds to the voltage on the rating plate inside
the cooker hood.
Loading ...
Loading ...
Loading ...