Operating Instructions
For Models: GTRLFSC & GTRLFSW
Freestanding Heated Towel Warmer
SPECIFICATIONS/DIMENSIONS
Model: GTRLFSC/GTRLFSW
Height: 890mm
Width: 730mm
Depth: 340mm
ELECTRICAL
Wattage, Painted – White: 65-70W
Stainless Steel: 65-70W
Power supply: 220 ~ 240 Volts a.c., 50Hz, single phase
International Protection Rating: IPX1 - Splash proof
When using this electrical appliance, basic safety precautions should always be observed.
This product is intended to warm and dry towels and is therefore hot to the touch. Note that
your towel warmer is intended to operate at 40–50 degrees however the surface temperature
of your towel rail will generally operate 20-25 degrees higher than the ambient air
temperature. Any rise in ambient air temperature is directly reflected in the appliance and as a
result it will feel hotter to the touch during warmer periods. The insulation effect of towels
will also cause the operating temperature to increase, be mindful of this when handling the
appliance.
PLEASE READ THESE INSTRUCTIONS CAREFULLY.
• Ensure the towel rail is installed in a location where switches and other controls cannot be
touched by a person in the bath or shower.
• DO NOT place towels or any other items on this appliance that have been in contact with
oil, petroleum based products or dry cleaning fluids.
• Use this appliance only with the voltage specified on the rating label, or elsewhere in these
instructions.
• We recommend this product is installed by a licensed electrician.
• Means for disconnection must be incorporated in accordance with the wiring rules.
• DO NOT immerse in any liquid.
• For service contact your nearest Authorised Service Agent.
• This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
given supervision or instruction concerning use of the appliance by a person responsible for
their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• DO NOT use this appliance for any purpose other than its intended use.
Safety Information
YOUR SAFETY IS IMPORTANT TO US.
PLEASE ENSURE YOU TAKE NOTE OF THE INSTRUCTIONS AND WARNINGS OUTLINED IN THIS MANUAL.
• To assemble, Attach the leg mounts to the towel rail frame using the screws provided.
Remove the uppermost screw from each of the brass fittings. Slide the legs inside the leg
mount and align the screw holes. Refit the screws and tighten.
• The Portable Heated Towel Rail MUST only be used with the Legs fitted.
• Regulations restrict the use of portable appliances in damp situations, keep safe distances
from water containers and with suitable electrical protection i.e. RCD.
• Do not operate this appliance with a damaged cord, plug, or after the appliance malfunctions
or has been dropped or damaged in any manner. Return to a qualified electrical person for
examination, electrical service and repair.
Installation
Always choose a safe location for the Towel Rail, keeping in mind the safety precautions
outlined. Ensure all packaging has been removed from the unit before use.
Operating your Towel Rail
HEAT CONTROL
These towel rails run at a single temperature. Be aware they do get very hot to the
touch.
CAUTION: The Towel Rail generates heat during use. Proper precautions must be taken
to prevent the risk of burns, scalds, fires or other damage to persons
Do not attempt to dismantle the Towel Rail. There are no user serviceable parts. For
service or repair, contact an authorised electrical service technician.
CARE AND CLEANING
The Towel Rail requires regular cleaning to ensure longevity of the product.
Turn off the isolating switch before cleaning. For additional protection, turn the mains
supply off before cleaning.
Ensure that the towel rail has been allowed to cool down completely before cleaning.
Use a damp cloth (not wet) to wipe the exterior of the towel rail to remove dust and
dirt.
Never use solutions such as benzene, thinners or polishing agents.
Never use abrasive materials like steel wool / scourers to scrub the towel rail.
Ensure the Towel Rail is dry before switching back on the mains supply and isolating
switch.
Goldair – New Zealand
Monday – Friday 8am-5pm
Phone +64 (0)9 917 4000
Phone 0800 232 633
Goldair – Australia
Monday – Friday 8am-5pm
Phone +61 (0)3 9336 4423
Phone 1300 465 324
[email protected]om.au
SUPPORT AND TECHNICAL ADVICE
RUST
Surface rust can occur on stainless steel over time. To avoid this the Heated Towel Rail is
best wiped down from time to time with a damp cloth and a stainless-steel cleaner. Fine
scratching can be removed using a metal polish such as ‘Autosol’ or ‘Brasso’ Paste which
are available from most supermarkets and car care shops.
PROOF OF PURCHASE
To receive warranty, retain receipt as proof of purchase.
Thank you for purchasing this Goldair product. Your product is warranted against faults and manufacture when
used in normal domestic use for a period of two years. In non-domestic use Goldair limits the voluntary warranty
to three months.
Goldair undertake to repair or replace this product at no charge if found to be defective due to a manufacturing
fault during the warranty period.
This warranty excludes damage caused by misuse, neglect, shipping accident, incorrect installation, or work carried
out by anyone other than a qualified electrical service technician.
PLEASE KEEP YOUR RECEIPT AS THIS WILL HELP VERIFY YOUR WARRANTY.
The benefits given to you by this warranty are in addition to other rights and remedies available to you under law in
relation to the goods or services to which this warranty relates.
In Australia, our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are
entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss
or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality
and the failure does not amount to a major failure.
In New Zealand this warranty is additional to the conditions and guarantees of the Consumers Guarantee Act
(1993).
Two Year Warranty
Goldair Two Year Warranty (IMPORTANT: Please complete and retain this warranty card)
Name
Address
Place Of Purchase Date Of Purchase
Name Of Product Model Number
Attach a copy of the purchase receipt to this warranty card
Due to continual design improvements, the product illustrated in this User Manual may differ slightly from the actual product.
Goldair – New Zealand
CDB Goldair
PO Box 100-707
N.S.M.C
Auckland
Phone +64 (0)9 917 4000
Phone 0800 232 633
www.goldair.co.nz
Goldair – Australia
CDB Goldair Australia Pty
PO Box 574
South Morang
Victoria, 3752
Phone +61 (0)3 9365 5100
Phone 1300 GOLDAIR (1300 465 324)
www.goldair.com.au
New Zealand
PO Box 100707,
North Shore Mail Centre,
Auckland, 0745
www.goldair.co.nz
Australia
PO Box 574,
South Morang,
Victoria, 3752
www.goldair.com.au
